CAD Astatic 210 Omnidirectional Boundary Microphone

PA SKU # CAD 210 MFR # 210 UPC # 631922105506
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Omnidirectional Adjustable Line Output "Button" Microphone with Limiting Circuitry - White

Omnidirectional Adjustable Line Output "Button" Microphone with Limiting Circuitry - White

The Astatic 210 is a miniature-boundary microphone designed for installation in security, ambient monitoring and observation applications. The output level is variable from -50dBv (3.2mV) to -10.5dBV(300mV) @ 1muBar which is designed to interface with security cameras, digital video recorders and other observation and recording devices.

Astatic's internal audio limiter circuitry tames high sound pressure levels and improves intelligibility by protecting the audio signal from distorting sensitive recording circuitry in cameras and digital recorders. The integrated volume control is located on the side of the microphone and is protected from tampering when the microphone is installed. The integrated 150Hz, 6dB/oct high-pass filter attenuates unwanted low frequency energy.

8 to18 VDC (70mA) is required to power the microphone (not supplied). The connection is made through a removable 3.5mm terminal block plug connector on the opposite end of the microphone. The connector accepts DC power and outputs an unbalanced, amplified signal.

The Astatic 210 housing is all-metal, designed for commercial applications. The threaded housing makes for easy installation into ceilings, walls, tables and other surfaces. Rubber isolation bushings and metal nut/washer hardware are also provided.

  • Adjustable line-level output
  • Omnidirectional pick-up pattern
  • Integrated high-pass filter for improved intelligibility and voice articulation
  • Integrated limiter maintains near/far signal integrity
  • All-metal housing suitable for commercial applications
  • Mounting hardware included
  • RF (radio frequency) Resistant Architecture
  • Shock-absorbing polymer bushings included
  • Inconspicuous design
  • Operating Principle: Condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 120Hz -18KHz
  • Sensitivity: Adjustable, -50dBV (3.2mV) to -10.5dBV (300mV) @1muBar
  • Impedance: 50 ohms
  • Maximum SPL: 100dB
  • Self Noise: 22dBA
  • Power Requirements: 8 to 18VDC, 70mA
  • Connector: 3.5 mm terminal block plug with 180 degree wire-to-plug orientation, accepting 30 to 14AWG size wire.
  • Polarity: Positive pressure on diaphragm corresponds to positive voltage on pin 2.
  • Finish: Durable matte-white urethane
  • Dimensions: (See drawing)
  • Net Weight [Mass]: 2.4oz [.07Kg]
  • Packaged Weight [Mass]: 5.4oz [.15Kg]
  • RF Immunity: Meets or exceeds EN55103-2, E1, E2, E3 and E4
  • RoHS Compliant
  • Included Accessories: 2 rubber bushings, hex nut and washer.
Write Your Own Review
You're reviewing:CAD Astatic 210 Omnidirectional Boundary Microphone
Your Rating