Description
16 Space Pull-Out Rack System, 19" Deep
The LPOR pull-out rack was designed for built-in wall and millwork applications and features heavy-duty slides for smooth pull-out access to rackmounted equipment. The 14-ga. steel base installs with screws and can be mounted flush or recessed up to twoinches in a boxed wall or cabinetry to allow room for equipment protrusions. When equipment is in place and wired, the assembly is secured in a fixed position with two screws through a perforated front security panel. The security panel can be removed to facilitate wiring and servicing, allowing the rack to be pulled out from the wall or millwork.
The rack ships unassembled in two boxes. Box one contains the rack bottom and base. Box two contains four corner-post mounting rails (two of which are 7U), three cable lacing bars, a perforated front/bottom security cover, a perforated front/top vent panel and hardware.
Features:
- Versatile low-cost rack for built-in applications is made in the USA with 100% certified US steel.
- 14-ga. steel base is engineered with two or four slides for pullout access to equipment.
- Load ratings:
- Racks with two slides support up to 125 lbs. Racks with four slides support up to 250 lbs.
- Four corner post rails are 11-ga. steel tapped 10-32. Rear rails are 7U for all models, front rail height varies by model.
- Two side stiffeners provide torsion rigidity.
- Three cable lacing bars facilitate organized cable management.
- Front/bottom security panel is perforated to match front/top ventilation panel and screws into position to deter slide out access to equipment.
- Black powder epoxy finish.
- Ships unassembled in two cartons.