Description
44 Space (77") Rollout/Rotating Rack System, 32" Deep
The LHR is a two-part rack that consists of an exterior enclosure and an interior rollout/rotating rack. It combines the advantages of a small footprint with superior accessibility to mounted equipment, cables and wiring. Models are available in two depths and three heights (24U, 35U, 44U). Exterior Rack: The exterior rack is a fully welded steel assembly with beveled corners, vented sides, open front, open back, top access, and provisions to mount power distribution products. The top has a 10U opening and includes two solid closure panels, front-to-rear knockouts for up to three pairs of wireless antenna, and rear knockouts in a 6" weld-braced platform. The rear knockout platform promotes fast, consistent field connections. It features four compound knockouts; center oval for wire pass through; and can support a 6" termination box or 4" conduit with locking ring (Greenlee field-punched hole). It also has a green ground wire to the internal rack, provisions for anchoring, and side-mounted front-torear supports to attach power accessories. Interior Rack: The interior rack is a steel assembly with numbered post-style mounting rails tapped 10-32. It is connected to an inner platform style caster base equipped with stainless steel ball transfers. The base pulls out smoothly from the enclosure. The ball transfers allow it to rotate for easy access to rear connections. The internal rack/base assembly supports up to 750 lbs. and can be removed from the outer enclosure for shop wiring and testing. Includes side/rear braces for strength and lacing holes for wire looming.
Features:
- Exterior Rack: welded steel with vented sides, open front, open rear,
- 10U top opening with solid closure panels.
- Interior Rack: steel with post-style 10-32 tapped mounting rails and side/rear braces mounted to caster base with stainless steel ball transfers. The assembly can be disengaged from the exterior unit for shop wiring.
- Screws (10-32) with washers
- Exterior rack has 4 lacing panels
- Interior rack has 4 lacing panels
- Black wrinkle powder epoxy finish
- Made in USA