Eminence The Copperhead 10" Guitar Speaker, 8 Ohm

PA SKU # EMN THECOPPERHEAD MFR # THE COPPERHEAD UPC # 876358000999
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • 10" Guitar Driver, 8 Ohm, 75 Watt

10" Guitar Driver, 8 Ohm, 75 Watt

The Eminence Copperhead guitar speaker combines the best of two tones, balancing country honk with a touch of classic blues. Extremely balanced vintage tone for smooth, driven leads and clean rhythm.

Nothing says "American Made" like rock 'n roll or blues. And nothing says "Classic" tone like the Patriot Series of guitar amp speakers from Eminence. Made in the U.S.A. for stand-up volume and reliable, rockin' clarity. The Eminence Copperhead 10" guitar speaker makes a wonderful replacement for the Oxford 12M6-4 guitar speaker found in the '60 - '63 Fender Bandmaster Blonde Guitar Amplifier as well as numerous other guitar speakers found in Fender, Crate, Marshall, Mesa Boogie, Peavey, and Rivera guitar amplifiers. Seven-year manufacturer's warranty.
  • Application: 10" Open or Closed Back
  • Configuration: 1, 2, or 4 x 10"
  • Coloration: Extremely balanced vintage tone with a little country honk and a touch of blues
  • Genre: Country, Blues, Bluegrass, and Funk
  • SPECIFICATION
  • Nominal Basket Diameter: 10", 254mm
  • Nominal Impedance*: 8 ohms
  • Power Rating**
  • Watts: 75W
  • Music Program: N/A
  • Resonance: 105Hz
  • Usable Frequency Range: 80Hz - 4.5kHz
  • Sensitivity***: 98.76dB
  • Magnet Weight: 20 oz.
  • Gap Height: 0.31", 7.92mm
  • Voice Coil Diameter: 1.5", 38.1mm
  • THIELE & SMALL PARAMETERS
  • Resonant Frequency (fs): 105Hz
  • DC Resistance (Re): 7.59
  • Coil Inductance (Le): 0.37mH
  • Mechanical Q (Qms): 13.27
  • Electromagnetic Q (Qes): 1.05
  • Total Q (Qts): 0.98
  • Compliance Equivalent Volume (Vas): 27 liters / 0.95 cu.ft.
  • Peak Diaphragm Displacement Volume (Vd): 0cc
  • Mechanical Compliance of Suspension (Cms): 0.14mm/N
  • BL Product (BL): 8.8 T-M
  • Diaphragm Mass Inc. Airload (MMs): 16.3 grams
  • Efficiency Bandwidth Product (EBP): 100
  • Maximum Linear Excursion (Xmax): 0mm
  • Surface Area of Cone (Sd): 366.1 cm2
  • Maximum Mechanical Limit (Xlim): N/A
  • MOUNTING INFORMATION
  • Recommended Enclosure Volume
  • Sealed: Acceptable
  • Vented: Acceptable
  • Driver Volume Displaced: 58.1 cu.in. / 0.95 liters
  • Overall Diameter: 10.11", 256.8mm
  • Baffle Hole Diameter: 9.13", 231.8mm
  • Front Sealing Gasket: Fitted as standard
  • Rear Sealing Gasket: Fitted as standard
  • Mounting Holes Diameter: 0.23", 5.72mm
  • Mounting Holes B.C.D.: 9.6", 243.8mm
  • Depth: 4.2", 107mm
  • Net Weight: 4.5 lbs, 2 kg
  • Shipping Weight: 6.4 lbs, 2.9 kgs
  • MATERIALS OF CONSTRUCTION
  • Coil Construction: Copper voice coil
  • Coil Former: Polyimide former
  • Magnet Composition: Ferrite magnet
  • Core Details: Non-vented core
  • Basket Materials: Pressed steel basket
  • Cone Composition: Paper cone
  • Cone Edge Composition: Paper cone edge
  • Dust Cap Composition: Zurette dust cap
Write Your Own Review
You're reviewing:Eminence The Copperhead 10" Guitar Speaker, 8 Ohm
Your Rating