Key Features
- Supports 1.9GHz & 2.4GHz
- Up to 25 FreeSpeak II Beltpacks
- Four 2-Wire Ports
- Supports 2 Transceivers Natively
- Fiber Transceiver Connections
Description
Digital Wireless Base Station for Systems up to 25 Beltpacks and 10 Antennas - 4-Pin Male XLR Headset Connector
The FSII-BASE-II is a base station for the wireless FreeSpeak II 1.9 GHz and 2.4 GHz active transceiver antennas and beltpacks. The FSII-BASE-II has four 2-wire connections for analog partyline connection, four 4-wire audio connections and four displays with soft keys. Dedicated stage announce (SA) output and program audio input are provided.
Features:
- Supports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station
- Routing and configuration of up to 25 FreeSpeak II beltpacks
- Four 2-wire ports with call signal, auto nulling (Clear-Com and RTS)
- Supports 2 transceivers natively and up to 10 transceivers via FSII splitter
- Fiber transceiver connections, supports two fiber-enables FSII splitters
- Multi-mode user interface has monitoring, setup and main station modes with assignable soft keys
- GPIOs allow assignment to trigger cue lights, tally or radios
- Matrix and partyline configurations support up to 12 channels and/or groups
- DECT Sync ports for optimizing co-located systems
- RF Audio Filter improves system performance in hard RF environments
- Browser-based Core Configuration Manager (CCM) with InSite for real-time statistics, beltpack and transceiver diagnostics, and functionality such as Remote Mic Kill
- Text messaging from CCM to wireless beltpacks
Specifications:
- Base-to-Beltpack Frequency Response: 100Hz - 7.1kHz
- No. of Beltpacks per Base Station: 25
- No. of Transceiver/ Antennas Supported by Base: 10
- No. of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiver
- PC Programming Port: 2 LAN RJ45
- Relay Port: DB15, supports one relay assigned to the SA out
- Partyline A ,B,C,D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatible
- Partyline Power On/Off: A/B, C/D paired
- Partyline Output Voltage: 26 - 28VDC, 800mA per pair (A/B or C/D)
- 4-Wire/Matrix Connection: 4 RJ-45
- Program Input: XLR-3F, transformer isolated, line-level input
- Stage Announce Output: XLR-3M, transformer isolated, line-level output
- Front Panel Headset: 4-pin male and 5-pin female options
- Front Panel Displays: 4 OLED's with encoders and assignable soft keys
- Front Panel Indicators: Antenna Status, Beltpack Status
- External Power Supply Connection: 12VDC
- Base Station Programming/Editing: Push-to-enter rotary encoder
- Power
- Input: 100-240V AC, 1.4A max
- Output: 12V DC, 60W, 5A
- Current Draw: 12V, 4A max, 48W max
- Dimensions
- 1.75 x 19.0 x 10.2 in (HxWxD)
- (44 x 483 x 259 mm)
- Weight
- 5.57 lbs (2.5 kg)