Littlite 12P-LED Gooseneck LED Lamp with 3/8" Screw Connector (12")

12" LED Permanent Mount Gooseneck Lamp (Threaded End)

P Series gooseneck lamps have 3/8" diameter, (3/8-32 UNEF) threaded end with one wire grounded lamp circuit and ground lug and nut. Use where a permanently mounted gooseneck is desired. Mounts in a 13/32" hole in material up to 1/8" thick. Add a mounting plate (MP) for mounting in thicker material.

Even illumination over a wide area... specifically designed to evenly illuminate consoles and control panels. Some LED lights produce a very bright "spot" of light, but this is useless for illuminating a broad work space. This is not the case with the Littlite LED.

Excellent color rendering through the addition of red LEDs to the usual "white" LED light sources. "White" LEDs are actually blue LEDs with a phosphor added to convert some of the blue light to yellow. This mixture of blue and yellow light appears white to the eye but appears very cold, or bluish. Red objects appear brown and dull because there is no red light for them to reflect. The added red light from the Littlite LED warms the character of the light and allows the eye to see reds as they are, vibrant and not washed out.

Low power - Approximately 100 milliamps at 12 volts drives the Littlite LED to full output.

Efficient - most of the power used by the Littlite LED is delivered to the LEDs... not a resistor.

Long life - Over-driving seriously reduces the life of white LEDs. The LEDs in the Littlite LED are not overdriven and may be expected to remain useful for over 5000 hours of operation.

NEW LED TECHNOLOGY built with the same Littlite reliability! Lifetime warranty on the mechanicals, two year warranty on the LED element.