Lectrosonics M175LS VHF Belt Pack Transmitter with Mute Switch (Band A)

  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Only 1 Left! — In Stock & Ready to Ship Order now! Limited quantity in stock! Most orders placed before 3pm MST ship same day (except weekends and holidays).
  • VHF Belt-Pack Transmitter with Mute Switch (169.505 MHz)

VHF Belt-Pack Transmitter with Mute Switch (169.505 MHz)

The M175 belt-pack transmitter is a VHF crystal controlled design for use with Lectrosonics 175 or 187 Series receivers and the Long Ranger portable sound system. The machined aluminum housing and spring-loaded belt clip provide a rugged package well suited for professional use. The M175 is a basic model with a single on-off switch. The M175LS model includes a toggle switch that provides noiseless muting of the audio, while leaving the transmitter carrier turned on, which is often desirable when used with the Long Ranger sound system.

The audio input section includes a high quality, low noise preamp with a wide range input limiter to prevent distortion during loud peaks in the audio. A wide range input gain control accommodates essentially any lavalier or headset microphone that use an electret capsule. High output dynamic microphones and modest line level signals can also be used.
Noise and hiss is reduced to very low levels with a type of noise reduction called a "compandor." The compandor processing is idealized for human voice to keep distortion at extremelly low levels.

The transmitter operates on a standard 9 volt alkaline or lithium battery. Battery status is indicated by the varying brightness of an LED on the control panel. The battery door rotates to open and close and remains attached to the housing at all times. Self adjusting battery contacts and firm pressure applied by the door assure reliable contact with any known 9 volt battery.

The M175 provides 50 mW of output power and is available on a wide range of VHF frequencies. The band of frequencies between 169 and 172 MHz are low powered allocations that can be used anywhere in the USA. For television production, the M175 is also available on VHF frequencies from 174 to 216 MHz, which covers TV station broadcasts in the USA on channels 7 through 13.

The housing is contructed of extruded and machined aluminum with durable powder coated and anodized finishes. Control panel nomenclature is laser etched into the finish for lasting ruggedness in the field.

  • Crystal controlled VHF frequencies
  • Full 50 mW power output
  • Uses input cable shield as antenna
  • Wide range input limiter for low distortion and maximum signal to noise ratio
  • 43 dB range on input gain control
  • LED battery status indicator
  • Self-adjusting battery compartment accommodates all makes of 9 volt alkaline and lithium batteries
  • Machined aluminum housing, panels and rotating battery door
  • Laser etched nomenclature
Write Your Own Review
You're reviewing:Lectrosonics M175LS VHF Belt Pack Transmitter with Mute Switch (Band A)
Your Rating