$1,875.00
Out of stock

Johnson Systems J-Pack Hi-Performance Dimmer Pack

PA SKU # JSI DP MFR # DIMMER PACK
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • 6 Channel Dimmer Pack
  • Next Generation Technology
  • Power Saving Stand-By Mode
  • LCD User Interface
  • Unique Lamp Warming Feature
  • Link Multiple Units

Versatile Hi-Performance Six-Channel Dimmer Pack, Choose Voltage, Output and Mounting Options

J-PACK Dimmers are a truly universal hi-performance series of 6 channel dimmer packs. Designed for versatility in virtually any environment, these unique and compact dimmer packs can be wall-mounted for permanent installations, 19" rack mounted, pipe mounted or used as portable units. Multiple units can be easily "ganged" together for fast system expansion.

Next generation "system-on-a-chip" technology provides unsurpassed value in SCR dimming. Stand-by power consumption of less than 1 Watt, allow for compliance with the International Energy Agency's "One Watt Initiative" for standby power consumption. This makes J-PACK's truly "green" with the minimal possible impact on the environment!

Available in various sizes and configurations, J-PACK's offer unique flexibility in professional grade dimming. Designed for modern lower wattage compact filament dimming loads these dimmers are full rated at 1,560 Watts for constant prolonged operation. Premium hydraulic magnetic circuit breakers offer safety and eliminate the false tripping concern of competitive dimmers. Intuitive LCD user interface combined analog inputs and contact closure inputs allow for industry wide application.

On demand "MagLev" thermal management technology produces superior cooling that is virtually silent making J-PACK's the natural choice for "quiet space" dimming installations. Exclusive "lamp warming" techniques extends lamp life considerably while maintaining industry leading performance!

RF = Rubber Feet
For portable applications, the dimmer pack can be set on any flat surface. Rubber feet are mounted on the bottom of the dimmer pack, with indents on the top cover panel to facilitate vertical stacking of up to 6 units high.

PM = Pipe Mount
For pipe mounting, a bracket, C-clamp and safety cable are provided and must be used to secure the dimmer pack to standard pipe sizes from 1" to 2" (1.25" to 2.375" outside diameter).

WM = Wall Mount
For permanent applications, the dimmer pack can be mounted to any wall surface capable of supporting its weight. Using the four (4) mounting holes provided, 1/4" (6mm) screws or bolts are required to fasten and secure the rack safely to the wall.

RM = Rack Mount
For rack mounting, brackets are provided and used to secure the dimmer pack in a standard 19" rack.

120 = 120VAC 1Ø 3-Wire via a Single 5' Edison Power Cord
Includes a single factory installed 5' (1.5m) Edison power cord. Connect the cables to a standard Edison (NEMA 5-15) receptacle, protected with a circuit breaker rated at a maximum of 15 Amps.

- Up to 15 Amps - maximum 1,800W total.
- Internal electrical wiring termination is not required.
- Available only with Duplex Edison output connectors/receptacles.

120HO = 120VAC 1Ø 3-Wire via Dual 5' Edison Power Cord
Includes two (2) factory installed 5' (1.5m) Edison power cords. Connect the cables to standard Edison (NEMA 5-15) receptacles, each protected with a circuit breaker rated at a maximum of 15 Amps.

- 2 circuits of up to 15 Amps - maximum 3,600W total.
- Internal electrical wiring termination is not required.
- Dimmers 1, 3 and 5 are powered from a single power cord.
- Dimmers 2, 4 and 6 are powered from a single power cord.
- Available only with Duplex Edison (NEMA 5-15) output connectors/receptacles.

120/240 = 120/240VAC 1Ø 4-Wire Terminal Block
- Up to 40 Amps per phase - maximum 9,000W total.
- Use wire size #12 to #4 AWG copper wire only, rated for 167°F (75°C) minimum.
- Strip insulation length to 0.44" (11mm).
- Torque power terminals (A, B, N, ) to 10.5 IN-LBS (1.2 NM).
- Dimmers 1, 3 and 5 are powered from Phase A.
- Dimmers 2, 4 and 6 are powered from Phase B.

120/208 = 120/208VAC 3Ø 5-Wire Terminal Block
- Up to 30 Amps per phase - maximum 9,000W total.
- Use wire size #12 to #4 AWG copper wire only, rated for 167°F (75°C) minimum.
- Strip insulation length to 0.44" (11mm).
- Torque power terminals (A, B, C, N, ) to 10.5 IN-LBS (1.2 NM).
- Dimmers 1 and 4 are powered from Phase A.
- Dimmers 2 and 5 are powered from Phase B.
- Dimmers 3 and 6 are powered from Phase C.

ED = 15A Duplex Edison (NEMA 5-15)
SP = 20A Stage Pin (Bates)
TL = 20A Twist Lock Ground (TLG) (NEMA L5-20R)
SO = 19-Pin Socapex
TB = Terminal Block
  • Available in a range of voltage and output configurations.
  • Unique power saving stand-by mode reduces power consumption to less than 1 Watt, a "green" dimmer pack.
  • Dim standard or low-voltage incandescent quartz lamps. Compatible with SCR dimmable LED lamps and fixtures.
  • Individual dimmer profile selection permits safe and silent control of non-dim lighting loads.
  • DMX512 start addressable in single channel (offset) or individually (patch).
  • DMX "snapshots" with scene playback.
  • Unique "lamp warming" feature extends lamp life significantly.
  • Analog and dedicated dry contact BMS inputs for interface with HVAC, security and audio.
  • "Load Shed" inputs for power management and photocell interface.
  • LCD user interface for easy setup and monitoring.
  • Over-heat and over-current protected.
  • Non-proprietary dimmer SCR's are 300% rated.
  • On-demand 'MagLev' thermal management technology produces superior cooling that is virtually silent.
  • Up to 10 year product warranty available!
  • Maximum Feeder Capacity:
    Edison 15 Amp 120 VAC 1Ø 3 wire. Max. Rating 1,800W.
    2 Circuits of Edison 15 Amp 120 VAC 1Ø 3 wire. Max. Rating 3,600W.
    30 Amp 120/208 VAC 3Ø 5 wire. Max. Rating 9,000W.
    40 Amp 120/240 VAC 1Ø 4 wire. Max. Rating 9,000W.
  • Power Termination: Power lug input.
  • Output selection of Terminal Block, Stage Pin, Edison, TLG or Socapex.
  • Maximum output 1,560 Watts per circuit.
  • Environment:
    Temperature Range: 23°F (-5°C) to 104°F (40°C) ambient.
    Humidity Range: 0% to 90% non-condensing.
  • Load Type: Incandescent quartz lamps and electronic (SCR dimmable) low voltage fixtures.
  • Switch Type: 300% rated, non-proprietary SCR solid state relay.
  • Rise Time: 300uS.
  • Physical: 13" x 17" x 3.4" (33 cm x 43 cm x 8.5 cm).
  • Weight: 22 - 23 lbs. (10.0 - 10.5 Kg) depending on model.
  • Material: 18-gauge steel CRS.
  • Finish: Hammer texture black powder coat.
Write Your Own Review
You're reviewing:Johnson Systems J-Pack Hi-Performance Dimmer Pack
Your Rating
Performance Audio, LLC BBB Business Review
Copyright © 2019. All rights reserved. Follow us on Facebook Follow us on Twitter Follow us on Instagram Follow us on YouTube Follow us on Pinterest Follow us on Google+