JK Audio CellTap 4C Wireless Phone Audio Tap

PA SKU # JK CELLTAP4C MFR # CELLTAP4C UPC # 814170010871
  • Featured Featured Item!
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Only 2 Left! — In Stock & Ready to Ship Order now! Limited quantity in stock! Most orders placed before 3pm MST ship same day (except weekends and holidays).
  • Taps Into Your Wireless Phone To Get A Well Balanced Mix of Your Conversation

Taps Into Your Wireless Phone To Get A Well Balanced Mix of Your Conversation

CellTap 4C, interview-recording adapter connects between the headset and cell phone, providing stereo output to a recorder or mixer.

CellTap 4C is compatible with most smart phones, tablets, and notebooks that use the 3.5 mm 4-conductor TRRS headset jack. Simply connect CellTap 4C between your existing ear-bud headset and phone, and then connect the stereo output to a mic level input on your recorder or mixer. The transformer coupled stereo output provides the local mic on the left channel and the caller on the right channel. Local audio is a full bandwidth connection, meaning your voice will sound considerably better than the caller. Of course, audio quality is limited by the quality and placement of the microphone on the ear-bud style headset.

CellTap 4C will not interfere with headset button controls on most devices. A headset is required for operation, as the phone will not recognize CellTap 4C without a headset connected.

Internal switch supports both Sleeve = Ground / R2 = Mic, and Sleeve = Mic / R2 = Ground wiring standards. The word standard is used loosely, since there are no actual standards for headset wiring or control operation. Therefore, we cannot promise compatibility with every phone.

WARNING - There are many laws that prohibit the recording of telephone conversations without prior consent from both parties. Be sure to check the laws in your area.
  • 3.5 mm TRRS Headset Jack
    3.5 mm TRRS cable to device
    3.5 mm TRS Stereo mic level output to recorder
    Screwdriver Caller Level adjustment
    Switch selects between popular TRRS configurations
    Passive, no AC or battery power needed
    Rugged Diecast Aluminum
    Made in USA
  • Output: 3.5mm TRS 600 ohms 1.4 mV RMS; -50 dBu nom.
    Size: 2" x 2" x1.3" (5.1 cm x 5.1 cm x 3.3 cm)
    Weight: 3.5 ounces