JBL Control 25AV Indoor/Outdoor Speaker (Black)

Two-Way 5.25" Shielded Surface Mount Indoor/Outdoor Speaker - 70.7V/100V, Black (Each)

Compact Indoor/Outdoor Background/Foreground Loudspeaker
The Control 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker.

The Control 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker.

Premium performance capability and even coverage ensures excellent sound quality throughout the listening area. Magnetic shielding allows use of the speaker in close proximity to video monitors.

The top-quality transformer, with reduced saturation, allows use on either 70 volt or 100 volt distributed speaker lines, with similar performance fidelity. In the bypass position, the high 8 impedance allows use of more speakers on a loudspeaker line.

The unique, global patent pending InvisiBall mounting method is simple to install, aims easily, and provides a high degree of theft deterrence.

The cabinet accepts a variety of paints to match any decor.

Weather resistance is maximized by a stainless steel grille, which is paintable. Coating the woofer in polypropylene and terminating its circumference in JBL's WeatherEdge, a seamless, butyl rubber extension of the woofer surround, protects critical transducer elements. The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance. Nickel/zinc rust-resistant terminals ensure a secure input connection.

JBL's exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound.

The Control 25AV can be used full range or low frequencies can be further augmented with the addition of one of the Control Contractor subwoofer models.

Available in black or white (-WH).

Features:

• Video shielded for use near video monitors.
• Extremely smooth frequency response.
• Stainless steel grill for harsh environments.
• 60 W transformer for 70 V or 100 V lines, with 8 ohms thru.
• SonicGuard overload protection.
• 130 mm (5.25 in) polypropylene coated woofer, 10 mm (.75 in) titanium coated horn-loaded tweeter.
• Includes InvisiBall mounting hardware and sealed input panel cover.
• Screw-down input terminals.
• 100° x 100° high frequency horn.

Specifications:

• Frequency Range: 70 Hz - 23 kHz (-10 dB)
• Power Capacity: 200 W Continuous Program Power; 100 W Continuous Pink Noise
• Transformer Taps:
  70V: 60 W, 30 W, 15 W, 7.5 W
  100V: 60 W, 30 W, 15 W
• Nominal Sensitivity: 87 dB SPL, 1 W @ 1 m (3.3 ft)
• Midrange (±1.5 dB, typical): 130 Hz - 14 kHz
• Nominal Coverage: 100° x 100°
• Maximum SPL @ 1m: 113 dB continuous peak pink noise 107 dB continuous average pink noise 103 dB continuous average music or speech
• Directivity Factor (Q): 4.9 dB, averaged 500 Hz to 4 kHz
• Directivity Index (DI): 6.9 dB, averaged 500 Hz to 4 kHz
• Nominal Impedance: 8 ohms
• Minimum Impedance: 6.7 ohms at 230 Hz
• Crossover Network: Second Order Low Pass, Second Order High Pass, Complex Optimization for Maximally Flat Response
• Low Frequency: 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
• High-Frequency: 20 mm (.75 in) titanium coated PEI
• Enclosure Material: High Impact polystyrene
• Grille: Painted stainless steel, black or white to match cabinet, paintable
• Overload Protection: Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition
• Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating
• Terminations: Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)
• Safety Agency Rating: Transformer is listed per UL1876
• Colors: Black or white (-WH)
• Rotation: Against wall on InvisiBall Base: 37° vertical 44° horizontal On bracket: 44° all directions
• Dimensions (H x W x D): 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
• Net Weight (ea): 4.0 kg (9 lb)
• Shipping Weight (ea): 9.0 kg (20 lb) per pair
• Included Accessories: 1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench
• Optional Accessories: MTC-25V: For vertical columnar orientation of up to 3 loudspeakers extension of the woofer surround that MTC-25/23H: For horizontal splaying of two speakers. Three brackets array up to six loudspeakers in a 360° array. MTC-28/25CM: Ceiling-mount adapter.