Description
High Power 2-Way All Weather Loudspeaker with 1 x 15" LF for Life Safety Applications, Gray
High Power 2-Way All Weather Loudspeaker with 1 x 15" LF & Rotatable Horn for Life Safety Applications
The AW566-LS is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2265H 380 mm (15 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver. The large format Progressive Transition wave-guide provides excellent 60° x 60° coverage. The loudspeaker system can used in either the vertical or
horizontal orientation.
Features:
- Weather-Resistant, All Fiberglass Enclosure
- EN54-24 Compliant
- 60° x 60° Coverage
- 2265H Differential Drive Low-Frequency Driver
- 2432H High Frequency Compression Driver
- Large PT Progressive Transition waveguide for excellent pattern control and low distortion
- Available in Gray and Black finish
- 400 W, 70/100V Transformer Included
- U-type Mounting Bracket Included
Specifications:
- Frequency Range (-10 dB): 42 Hz - 20 kHz
- Frequency Response (±3 dB): 89 Hz - 18 kHz
- Coverage Pattern: 60° x 60°, rotatable waveguide
- Coverage Angle:
500 Hz - Horizontal: 139°, Vertical: 93°
1000 Hz - Horizontal: 111°, Vertical: 91°
2000 Hz - Horizontal: 78°, Vertical: 64°
4000 Hz - Horizontal: 70°, Vertical: 52° - Directivity Factor (Q): 15.8
- Directivity Index (DI): 12 dB
- Crossover Frequency: 1.1 kHz
- Long-Term System Power Rating (IEC): 400 W (1600 W peak), 100 hrs
- Maximum SPL: 127 dB-SPL cont avg (133 dB peak)
- Maximum SPL (@ 4m): 114.24 dB
- System Sensitivity (1W @ 1m): 100 dB SPL
- Sensitivity (1W @ 4m): 89.6 dB SPL
- 70V / 100V Transformer Taps: 70V: 400 W, 200 W, 100W
- 100V: 400W, 200W
- Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
- Nominal Impedance: 8 ohms
- Sensitivity (1W @ 1m, within operational band): 98 dB SPL
- High Frequency Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
- Nominal Impedance: 8 ohms
- Sensitivity (1W @ 1m): 113 dB SPL
- Waveguide: PT-H66HF-1
- Enclosure: Hand-Laminated Fiberglass, gray gelcoat (similar to Pantone 420C), available
- in black (-BK)
- Suspension Attachment: 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety.
- Grille: Three layer grille assemblies consisting of 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh.
- Input Connector: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
- Environmental Specifications: IP55C per IEC 529
- Dimensions (H x W x D in horizontal cabinet orientation): 485 x 810 x 478 mm (19.1 x 31.9 x 18.8 in)
- Net Weight: 28.3 kg (62.5 lb)