Menu × Recording Live Sound Microphones DJ Lighting Installation Video Accessories Brands Specials
My Account Track Order Contact Us Services Events Blog Newsletter Apps

Toll Free: (800) 771-8330

Neumann D-01 Set

No Longer Available
This item has either been discontinued by the manufacturer or is no longer available to purchase on our website.

Please Contact Us for more information.

(800) 771-8330

Solution-D Large Diaphragm Digital Microphone with DMI-2 Interface, Cables, Suspension Mount and Case


Solution-D: A Microphone Technology Milestone
Neumann has repeatedly set new standards in the field of analog microphone technology. The first condenser microphone, switchable directional characteristics, the first stereo microphone and 48 V phantom power were all developed by Neumann, introducing new dimensions to the field of microphone and recording technology.

With the digital Solution-D microphone system, Neumann has now succeeded in bringing the dynamic range and signal fidelity of the best analog studio microphones into the digital realm. This means that, for the first time, the whole audio production signal chain is entirely digital.

Optimal A/D conversion, especially developed synchronization technology and the capability of controlling standard microphone parameters and various integrated signal processing functions remotely ensure that Solution-D meets the most demanding professional audio production requirements. The basic technological principle is to permit recording with no "bottlenecks" associated with loss of signal quality.

The comprehensive features provided by Solution-D make it possible to achieve excellent quality with small digital productions - with only a single microphone and a recording device.

The Solution-D digital microphone system is comprised of the following components: A digital microphone (available at the moment are the D-01 and TLM 103 D large-diaphragm microphones and the KM D small-diaphragm microphone), the DMI-2 digital microphone interface and the RCS remote control software, which operates and remotely controls the microphone. A PC or Mac can serve as the control computer, which of course can simultaneously be used to operate the actual recording system, for instance.

The signal and data transmission of the microphone conform to the new AES 42 standard. The introduction of this standard governing the transmission of output signals, the supply of power and the remote control of microphones with digital outputs provided the necessary preconditions for the development of digital microphone technology. Neumann made a decisive contribution to the drafting of the AES 42 standard.

Instead of being used with the DMI-2, the KM D small-diaphragm microphones and the TLM 103 D large-diaphragm microphone can alternatively be connected to the AES/EBU or S/PDIF interface of a recording system by means of a Connection Kit. However, if a Connection Kit is used, it is not possible to control the microphone functions remotely. Thus a control computer is not required. In this case, if it is necessary to synchronize several microphones, a sample rate converter must be used.

All of the possible Solution-D system configurations are illustrated here.

The Starter Sets, comprised of a KM 184 D or TLM 103 D and a Connection Kit, provide an economically attractive entry into the world of digital microphones. If the user later wishes to take advantage of additional switchable parameters and remotely controlled functions, the system can be expanded at any time by acquiring a separate DMI-2.

Any audio engineer who is familiar with digital technology can begin production with Solution-D immediately, without extensive training. The additional features provided by digital microphones open up new possibilities for production.

Remote control of standard microphone parameters
With the DMI-2 digital microphone interface, familiar microphone settings such as the directional characteristic, pre-attenuation and low-cut filter can be controlled remotely. Changing the settings of microphone parameters is greatly simplified, which facilitates rapid testing of different settings so as to optimize the sound quality. It is no longer necessary to make handwritten records of all of the settings.

Integrated digital audio signal processing
An A/D converter developed by Neumann, especially optimized for the capsule signal conditions, receives the output signal directly from the microphone capsule. Level matching required for subsequent devices is performed digitally, in the microphone itself. Analog components such as preamplifiers and A/D converters are thus no longer required, resulting in significant cost savings.

The immediate conversion of the analog signal results in a significant improvement in the dynamic range. This is perceptible throughout the entire signal chain, making level adjustments less critical.

Mixing console functions such as mute and phase reverse, which affect the microphone signal, are likewise integrated into the microphone. For the D-01, even commands such as "On Air" (red light) are executed by means of remotely controlled microphone LEDs. A particularly significant feature is the transient limiter function. For the first time, this function can be applied at the most effective point, at the signal source, in order to reduce harmful transients. In the case of analog microphones, in the subsequent signal path a great deal of headroom must be provided for such signals, which are very short but which have a large amplitude.

Data transmitted by the microphone
Information transmitted by the microphone includes the name of the manufacturer, the model, the serial number, the software version installed in the microphone, and a list of remotely controlled functions supported by the microphone. Status indicators such as certain warning functions and operating readiness are also transmitted.

During production, the audio engineer can continuously monitor the status of the microphones, since all the important parameters, including signal levels, are displayed on the screen. In addition, a text input field is provided, allowing a channel name to be assigned, e.g. indicating the sound source. All of the microphone settings can be stored in configuration files and retrieved as required.

Why digital signal processing™
The digitization of audio data began many years ago, at the end of the signal processing chain, with the development of the first digital recording equipment. Almost all audio signal processing components are now available in digital form.

It is well-known that digital signals provide the necessary preconditions for mathematically precise calculations and processing, permitting signals to be modified, copied, transmitted and stored as desired, with no loss of quality.

In contrast, analog signal processing is characterized by limited precision, error accumulation, a lack of redundant signal information, and the use of error correction procedures. Each analog signal processing step is thus associated with a degradation of signal quality.

This results in a gradual decrease in the dynamic range, due to the introduction of noise voltages and nonlinear distortion.

In addition, digital processing permits the performance of functions that are difficult or impossible to execute via analog signal processing. This applies particularly to functions that are based on intermediate data storage.

A/D conversion
Despite continuing improvements, integrated circuits available on the market still constitute a limiting factor in the conversion of audio data from analog to digital form.

For instance, the best delta-sigma A/D converters currently available as integrated circuits provide a dynamic range of 115 dB to 120 dB (A-weighted), for a theoretical word length of 24 bits.

This can be compared with the dynamic range of up to 130 dB exhibited by a high-quality analog condenser microphone. In order to prevent the addition of noise to the signal, a significantly improved A/D converter is therefore required. The conversion process must simultaneously be optimized for the signal levels and source impedance found in the microphone.

When A/D conversion is carried out in a mixing console or other equipment, as a rule, loss of signal quality is to be expected, since the conversion occurs after level matching has already been performed. As a result, the dynamic range is affected by headroom considerations and by the characteristics of the microphone preamplifier and the A/D converter.

The development goal was thus to effect high-quality digitization of the capsule signal directly in the microphone, so as to permit level matching and other processing steps to be performed digitally. This is the only way of preserving the signal quality that is generated by the microphone.

The AES 42 standard describes two modes of synchronizing the microphone with the receiver (e.g. a mixing console or DMI-2 digital microphone interface):

Mode 1: The microphone operates asynchronously, using the sampling rate of its internal quartz oscillator. In this case, a sample rate converter is required at the receiver. However, this mode of operation should be used only if mode 2 synchronization is not possible, since conventional sample rate converters will impair the signal quality, for instance in terms of dynamic range and latency time.

Mode 2: The microphone is synchronized with a master word clock, which can be either an external word clock or the internal word clock of the DMI-2. In this case, a frequency/phase comparison of the microphone signal with the master word clock is carried out in the AES 42 receiver (DMI-2). A control signal is then generated that is transmitted via the remote control data stream to the microphone, where it controls the frequency of the internal quartz oscillator.

Via the BNC output of the DMI-2, the internal word clock generator can be used to synchronize additional DMI-2s and subsequent processing equipment, such as a mixing console.

The D-01 digital microphone
At first glance, the D-01 microphone appears similar to an analog microphone. However, in the microphone, an A/D converter developed by Neumann which is especially optimized for capsule signal conditions receives the output signal directly from the capsule. The signal is immediately converted into a digital signal, generating an internal 28-bit signal with a dynamic range of more than 130 dB (A-weighted, including capsule characteristics).

The digital signal is then processed directly in the microphone. This means that parameters such as the directional characteristic, pre-attenuation, low-cut filter, gain and various switching functions can be set digitally and controlled remotely. External components such as analog preamplifiers and A/D converters are thus no longer required.

For the purpose of clear identification, information concerning the name of the manufacturer, model, serial number and installed software version is transmitted by the microphone to the connected receiver.

The microphone is equipped with a 3-pin XLR connector for transmission of a bi-directional signal conforming to the AES 42 standard. This signal includes the balanced digital microphone output signal, the phantom power supply, and a remote control data stream that also contains a signal for synchronizing the microphone with a master clock.

The D-01 is available with a classic nickel finish. All standard sampling frequencies are supported, from 44.1 kHz to 96 kHz.

The DMI-2 digital microphone interface
Equipment that supports the new AES 42 standard can process the output signals of Solution-D microphones directly. In all other cases, the DMI-2 digital microphone interface is used. The DMI-2 is a separate, two-channel device which converts the AES 42 data format supplied by the microphone into an AES/EBU signal.

The DMI-2 is operated via the Neumann RCS remote control software, which is installed on a desktop or laptop computer. The computer is connected to the DMI-2 via a USB port and a USB to RS 485 interface converter. If a large number of microphones is used, several DMI-2s can be cascaded. In this case, each digital microphone interface can be addressed individually.

In addition to a word clock input and output, the DMI-2 also has an internal word clock generator. If no master word clock signal (e.g. from a mixing console) is present at the input, the DMI-2 internal word clock is used automatically to synchronize the two microphone channels, and the signal is switched to the word clock output.

External commands such as "On Air" (red light) can be controlled via a 9-pin user port.

RCS remote control software
The digital microphones can be controlled via the RCS remote control software, which is a component of the Solution-D system. The software runs as an independent program on a desktop or laptop computer.

All important parameters are displayed on the screen and can be changed at any time. During production, the audio engineer can monitor the operating status and parameters of all connected microphones, and can change the settings quickly and easily if necessary.

The parameters displayed include the directional characteristic, pre-attenuation, low-cut filter, gain, various microphone status indicators, command indicators, and mute and phase reverse functions. It is also possible to monitor signal levels on the screen.

Information transmitted by the microphone, such as the name of the manufacturer, model and serial number, is displayed for clear identification of the microphone. In addition, it is possible to input additional information, such as the name of the sound source. Settings for the complete microphone setup can of course be stored and retrieved as required.


  • Extremely wide dynamic range: more than 130 dB

  • Neumann A/D conversion process

  • Pre-amps and external A/D converter are no longer necessary

  • Wide range of new functions through integrated digital signal processing

  • Control and monitoring of all microphone parameters and functions through Remote Control Software

  • Digital Microphone

  • A/D Converter, optimized for direct conversion of the capsule signal

  • New capsule design

  • Additional DSP functions

  • Limiter (incl. de-esser)

  • All parameters and functions remote controllable

  • Digital Microphone Interface

  • AES 42-2001 to AES/EBU conversion

  • Reliable synchronization through new PLL process

  • 2 channels (8 channel version planned), cascadable

  • Phantom powering

  • Word clock in and out

  • Integrated word clock generator

  • Remote Control Software

  • Control and monitoring of all parameters

  • DSP function control

  • Peak level meter

  • Gain reduction bargraph for limiter

  • Save, copy, and recall for complete setups

General Specifications of the Solution-D microphones:

  • Interface: AES 42

  • Remote controlled1) functions:- Polar pattern5)- Low-cut: flat, 40, 80, 160 Hz- Pre-attenuation: 0 , -6, -12, -18 dB- Gain: 0...63 dB in 1 dB steps, clickless- Testsignal: 1 kHz, pink noise, white noise- Parametric compressor/limiter (incl. de-esser function)- Independent peak limiter avoiding any clipping- Switch functions: soft muting, phase reverse, signal lights- Signal lights: red5) and blue LEDs (switchable via RCS or User Port)

  • A/D conversion: Neumann process (patented), 28-bit internal word length

  • Digital signal processing: Fixed-point, variable internal word length 28 bits to 60 bits

  • Synchronization: AES 42-Mode 2, Mode 1 (asynchronous), Asynchronous operation (free-running),

  • basic frequency accuracy: +/- 25 ppm

  • Synchronous operation, pull-in range: Min. +/- 100 ppm

  • Power supply (phantom power complying with AES 42)

  • Supply voltage range: +7 V to +10,5 V

  • Output: XLR3M, 24 bits as per AES/EBU (AES 3)

D-01 Specifications:

  • Acoustic transducer: K 07 large double-diaphragm capsule, diameter 30 mm with protected internal electrodes

  • Directional characteristic: 15 remote controllable polar patterns, from omni to cardioid to figure-8

  • Frequency response: 20 Hz to 20 kHz

  • Free-field sensitivity2) 3): -44 dBFS

  • Equivalent noise level, CCIR4): 19 dB

  • Equivalent noise level, A-weighted4): 8 dB-A

  • Signal-to-noise ratio3), CCIR4): 75 dB

  • Signal-to-noise ratio3), A-weighted4): 86 dB

  • Maximum SPL at 0 dBFS: 138 dBSPL

  • Dynamic range, A-weighted4): 130 dB

  • Sampling rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

  • Current consumption: max. 220 mA

  • Weight: approx. 700 g, Diameter: 63.5 mm, Length: 185 mm

DMI-2 (Digital Microphone Interface) Specifications:

  • 2 channels, Inputs: XLR3F, AES 42; Outputs: XLR3M, AES/EBU, 24 bit

  • Control bus: RS485 via RJ 45 jack. Second RJ 45 jack for cascading purposes (up to 4 DMI devices today, 16 devices in future). Connection to the computer's USB port via Neumann USB485 interface converter (included).

  • User Port: 9-pin sub-D, 3 functions per channel

  • Synchronization: AES 42 - Mode 2 (PLL system using an external Word Clock and remote controlling the VCXO in the microphone, default mode), AES 42 - Mode 1, (asynchronous, needs a sample rate converter (SRC) at the receiver side).

  • Word clock input: BNC, 75 ohms.

  • Word clock output: BNC, 75 ohms, automatically set to the internal word clock master when no external word clock received. Selectable internal sampling rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz.

  • External Word clock: 44.1, 48, 88.2, 96, 176.4, 192 kHz or AES 11 format.

  • Indicators: Data Valid (AES 42) and Sync Locked (Mode 2) for each channel, Power On and Ext. Word Clock.

  • Power supply: 90-240 V, 50/60 Hz.

  • Storage of the last microphone settings and reloading to the microphones after power on automatically without the need of the computer/RCS.

Features of the RCS (Remote Control Software):

  • Communication via USB port (Win 2000/98SE/ME/XP, MAC OS version 8.6...10 on PowerPC)

  • Up to 8 channels displayed simultaneously on the screen

  • Controllable functions: polar pattern, low-cut, pre-attenuation, gain, test signals, limiter/compressor/de-esser, peak limiter, phase reverse, mute, sampling rate, synchronization mode, signal lights,...

  • Display: peak level meter, gain reduction meter for compressor/limiter/de-esser and peak limiter, microphone properties (manufacturer, model, serial number, hardware and software revision, internal latency time), DMI properties, status signals (overload, limiter active, data valid, sync locked, power on)

  • Saving/Loading of configurations

  • Individual channel labelling

  • Software update of Neumann microphones and DMI device


Q & A

D-01 Set
MFR Part Number
Product Category
USB Microphones, Studio Microphones
Unit of Measure
Shipping Weight
5.00 lbs.
Page Views
Previous Neumann product
Next Neumann product
Connect with Performance Audio
Sign up for our newsletter.
Click here to see our current newsletter >
Why Choose Performance Audio?
Light Bulb

40+ Years in the Business

Performance Audio isn't new to Pro Audio & Video. We have been servicing the needs of professionals for over 40 years! We have the expertise to help you get the job done right. The first time.


Real World Convenience

Performance Audio has built lasting relationships with the brands you love! We have decades of experience working with our suppliers. We are equipped to get you what you need, when you need it. When you need it.


Staff with Know-How

Performance Audio has long believed that experience and knowledge are vital to building relationships with our customers. We focus on getting, and keeping, a staff who know and love the Pro Audio & Video world. People like you.


Prices That Don't Suck

Performance Audio is one of the largest suppliers of professional audio & video gear in the Mountain West. We have one of the largest inventories in the industry. That means we can save you money! The right price.


Specials Shop by Brand Manufacturer Directory Request a Quote Get our iOS Apps
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Performance Audio LLC BBB Business Review

Performance Audio Coupons on Ultimate Coupons
Performance Audio Apps on the iTunes App Store, Audio Tool, Decibel Meter Pro, Tone Generator Pro

© 2018 Performance Audio, LLC. All rights reserved.

All brand, company or product names contained may be trademarks or registered trademarks of their respective owners. Prices, specifications, and images are subject to change without notice. Not responsible for typographical or illustrative errors. All prices listed are in US dollars and do not include shipping and/or sales tax, when applicable.