{"product_id":"rdl-dds-btn44-wall-mounted-bi-directional-line-level-and-bluetooth-audio-dante-interface-stainless","title":"RDL DDS-BTN44 Bi-Directional Line-Level\/Bluetooth Dante Interface on Decora Plate (Stainless Steel)","description":"\u003cp\u003eWall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface - Stainless Steel\u003c\/p\u003e\n\u003cp\u003eStereo audio from a compatible Bluetooth-enabled device feeds two Dante network audio channels. Stereo audio connected to a front-panel Mini-Jack or L and R RCA jacks feeds two other Dante network audio channels.\u003c\/p\u003e\n\u003cp\u003eStereo audio is available to users through a front-panel Mini-Jack fed from two Dante network channels. A rear-panel terminal block provides either a balanced (+4 dBu) or unbalanced (-10 dBV) output from one Dante network channel. That output may feed a variety of RDL wall panels to provide a specific mic or line level output to users, or it may be used to feed the audio power amplifier in the associated audio zone. One Dante channel may be routed back to a connected device through the Bluetooth interface enabling full duplex communication.\u003c\/p\u003e\n\u003cp\u003eThe D SERIES-BTN44 modules are powered from PoE. The installer can customize the module name and programming password through the Bluetooth connection using a smartphone, computer or tablet terminal program. These modules feature studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth Audio Input for Dante Networked System\u003c\/li\u003e\n\u003cli\u003eConsumer Audio Inputs on Mini-Jack or RCA Jacks\u003c\/li\u003e\n\u003cli\u003eReturn Audio Talk Channel from Dante Network to Bluetooth Connected Device\u003c\/li\u003e\n\u003cli\u003eConsumer Audio Outputs on Mini-Jack\u003c\/li\u003e\n\u003cli\u003eBalanced and Unbalanced Audio Line Outputs on Rear Panel\u003c\/li\u003e\n\u003cli\u003eIntuitive Single Button Bluetooth Pairing with LED Status Indication\u003c\/li\u003e\n\u003cli\u003eSpecial Software Not Required for Module Setup\u003c\/li\u003e\n\u003cli\u003eCustomize the Module ID Name and Settings through the Bluetooth Connection\u003c\/li\u003e\n\u003cli\u003eMono or Stereo Mode for Audio Inputs is Switch-Selectable Behind Cover Plate\u003c\/li\u003e\n\u003cli\u003eModule is PoE Powered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork Connector:RJ45 with Link and Speed indicators\u003c\/li\u003e\n\u003cli\u003eDigital Audio Ethernet Protocol:Dante\u003c\/li\u003e\n\u003cli\u003eTransmission Rate:100 Mbps\u003c\/li\u003e\n\u003cli\u003eSample Rates Supported:44.1 kHz, 48 kHz (default)\u003c\/li\u003e\n\u003cli\u003eBit Depth Supported:24 bits\u003c\/li\u003e\n\u003cli\u003eAudio Operating Levels:-20 dBFS = +4 dBu (balanced); -20 dBFS = -10 dBV (unbalanced), nominal\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eBluetooth to Network Interface Section\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eFrequency Response:20 Hz to 20 kHz (± 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eTHD+N:\u0026lt; 0.1%\u003c\/li\u003e\n\u003cli\u003eNoise below -20 dBFS:\u0026lt; -70 dB\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eNetwork to Bluetooth Interface Section\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eVoice signal feeding device:One Dante channel (mono, -20 dBFS nominal)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eNetwork to Mini Jack Output Section\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eOutput:Stereo mini jack\u003c\/li\u003e\n\u003cli\u003eFrequency Response:20 Hz to 20 kHz (± 0.75)\u003c\/li\u003e\n\u003cli\u003eTHD+N:\u0026lt; 0.05%\u003c\/li\u003e\n\u003cli\u003eNoise below -20 dBFS:\u0026lt; -80 dB\u003c\/li\u003e\n\u003cli\u003eCrosstalk (channel to channel):\u0026lt; 80 dB\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eNetwork to Line Output Section\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eOutputs:Balanced and unbalanced on detachable terminal block\u003c\/li\u003e\n\u003cli\u003eFrequency Response:20 Hz to 20 kHz (± 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eTHD+N:\u0026lt; 0.05%\u003c\/li\u003e\n\u003cli\u003eNoise below -20 dBFS:\u0026lt; -80 dB\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLine Inputs to Network Interface Section\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eInputs (4):Stereo Mini jack (L and R); RCA jack (L and R)\u003c\/li\u003e\n\u003cli\u003eDante channels used (2):L and R\u003c\/li\u003e\n\u003cli\u003eFrequency Response:20 Hz to 20 kHz (± 0.25)\u003c\/li\u003e\n\u003cli\u003eTHD+N:\u0026lt; 0.05%\u003c\/li\u003e\n\u003cli\u003eNoise below -20 dBFS:\u0026lt; -75 dB\u003c\/li\u003e\n\u003cli\u003eCrosstalk (channel to channel):\u0026lt; 75 dB\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eCommon\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eIndicators (5):Bluetooth (2), Network Sync\u003c\/li\u003e\n\u003cli\u003ePower Connection:PoE (RJ45)\u003c\/li\u003e\n\u003cli\u003eAmbient Operating Environment:0° C to 40° C\u003c\/li\u003e\n\u003cli\u003ePower Requirement:PoE\u003c\/li\u003e\n\u003cli\u003ePoE:Class 0, IEEE 802.3af\u003c\/li\u003e\n\u003cli\u003eDimensions:3.52\" (8.94 cm) W; 4.11\" (10.44 cm) H; 2.09\" (5.31 cm) D\u003c\/li\u003e\n\u003cli\u003ePackage Type:Cardboard Box\u003c\/li\u003e\n\u003cli\u003ePackage Dimensions:6.0 x 6.0 x 2.625 in.\u003c\/li\u003e\n\u003cli\u003eShipping Weight:1.15 lb.\u003c\/li\u003e\n\u003cli\u003eWEEE weight:0.78 lbs.\u003c\/li\u003e\n\u003cli\u003eTariff code:8518.50.0000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42497302069426,"sku":"RDL DDSBTN44","price":1463.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/products\/dds-btn44_f.jpg?v=1753205652","url":"https:\/\/www.performanceaudio.com\/en-ca\/products\/rdl-dds-btn44-wall-mounted-bi-directional-line-level-and-bluetooth-audio-dante-interface-stainless","provider":"Performance Audio","version":"1.0","type":"link"}