{"product_id":"rdl-db-bt1a-wall-mounted-bluetooth-audio-format-a-interface-black","title":"RDL DB-BT1A Bluetooth Audio Format-A Interface on Decora Plate (Black)","description":"\u003cp\u003eThe D SERIES-BT1A Modules Are Bluetooth Audio Receiving Modules Compatible With RDL Format-A Twisted Pair Receivers.\u003c\/p\u003e\n\u003cp\u003eWhen paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The stereo signal is sent through two Format-A pairs to any RDL Format-A receiver. A stereo\/mono switch set by the installer permits summed mono audio to be sent over one switch-selected pair to the Format-A receiver.\u003c\/p\u003e\n\u003cp\u003eIf set for stereo operation, an additional Format-A source (set to Pair A) may be daisy chained with the D SERIES-BT1A to a three-pair Format-A receiver. If set for mono operation, up to three D SERIES-BT1A modules may be daisy chained to a single three-pair Format-A receiver. Connections between Format-A modules and Format-A receivers use standard CATx cable with RJ45 connectors.\u003c\/p\u003e\n\u003cp\u003eThe D SERIES-BT1A modules are powered from the Format-A receiver. The installer can customize the module name and programming password through the Bluetooth connection using a smartphone, computer or tablet terminal program. These modules feature studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth Audio Input for Installed Sound System\u003c\/li\u003e\n\u003cli\u003eIntuitive Single Button Pairing with LED Status Indication\u003c\/li\u003e\n\u003cli\u003eSpecial Software Not Required for Module Setup\u003c\/li\u003e\n\u003cli\u003eCustomize the Module ID Name and Programming Password through the Bluetooth Connection\u003c\/li\u003e\n\u003cli\u003eSends Received Bluetooth Audio to RDL Format-A Receivers\u003c\/li\u003e\n\u003cli\u003eMono Summed or Stereo Audio Input Mode is Switch-Selectable on Rear Panel\u003c\/li\u003e\n\u003cli\u003eRear-Panel Switch Selects which RJ45 Pair (A, B or C) is Fed in Mono Summed Mode\u003c\/li\u003e\n\u003cli\u003eDaisy-Chain up to Three D SERIES-BT1A modules to One Format-A Receiver in Mono Mode\u003c\/li\u003e\n\u003cli\u003eRemotely Powered through Twisted Pair Cable\u003c\/li\u003e\n\u003cli\u003eSignal and Power Pair Pass-Through on RJ45 Jacks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutput:RDL Format-A (RJ45)\u003c\/li\u003e\n\u003cli\u003eFormat-A Input:RJ45 LOOP IN\u003c\/li\u003e\n\u003cli\u003eFormat-A Signal Pair Used:A, B, or C (summed mono mode, rear-panel switch-selectable); B and C (stereo mode, pair A pass through)\u003c\/li\u003e\n\u003cli\u003eFrequency Response:20 Hz to 20 kHz (± 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eTHD+N:\u0026lt; 0.1%\u003c\/li\u003e\n\u003cli\u003eNoise below -20 dBFS:\u0026lt; -70 dB\u003c\/li\u003e\n\u003cli\u003eCrosstalk (channel to channel):\u0026lt; 70 dB\u003c\/li\u003e\n\u003cli\u003eAudio Operating Levels:-20 dBFS = +4 dBu (balanced), nominal\u003c\/li\u003e\n\u003cli\u003eAmbient Operating Environment:0° C to 40° C\u003c\/li\u003e\n\u003cli\u003ePower Requirement:24 Vdc @ 100 mA (through RJ45)\u003c\/li\u003e\n\u003cli\u003eDimensions:1.73\" (4.39 cm) W; 4.11\" (10.44 cm) H; 1.62\" (4.11 cm) D\u003c\/li\u003e\n\u003cli\u003ePackage Type:Cardboard Box\u003c\/li\u003e\n\u003cli\u003ePackage Dimensions:3.625 x 4.625 x 2.125 in.\u003c\/li\u003e\n\u003cli\u003eShipping Weight:0.45 lb.\u003c\/li\u003e\n\u003cli\u003eWEEE weight:0.29 lbs.\u003c\/li\u003e\n\u003cli\u003eTariff code:8518.50.0000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42497301643442,"sku":"RDL DBBT1A","price":602.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/products\/db-bt1a_f.jpg?v=1753128186","url":"https:\/\/www.performanceaudio.com\/en-ca\/products\/rdl-db-bt1a-wall-mounted-bluetooth-audio-format-a-interface-black","provider":"Performance Audio","version":"1.0","type":"link"}