{"product_id":"rdl-d-rn22-wall-mounted-bi-directional-mic-line-dante-interface-2x2-white","title":"RDL D-RN22 Wall-Mounted Bi-Directional Mic\/Line Dante Interface 2x2 (White)","description":"\u003cp\u003eThe D-RN22 is a complete wall-mounted Dante or AES67 audio network interface. It features two XLR mic or line inputs on the front panel and two balanced line outputs on a rear-panel detachable wiring block. The module is configured and adjusted using RDL CONSOLE or other network control software. The D-RN22 fits a standard US single-gang electrical box or can be used with the RDL EP-1 adaptor for mounting in EU\/UK square back boxes with 60 mm distance screw hole mounting centers. The D-RN22 is PoE powered and is available in multiple finishes with optional customized graphics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic\/Line to Network Section\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two XLR inputs are each converted to a separate Dante network transmit channel. Five gain settings are software-selectable for XLR inputs. Three gain settings are provided to match condenser or dynamic microphones. Two gain settings are provided to match standard line levels. P48 phantom voltage may be software enabled when an input is set for mic level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork to Line Section\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo Dante audio channels are converted to balanced line level feeding a rear-panel detachable wiring block. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a software-controlled attenuator adjustable in 1 dB steps to a maximum attenuation of 63 dB then OFF. The outputs may drive local power amplifiers or may feed additional XLR jacks mounted adjacent to the D-RN22 in a dual-gang box. Two XLR mic or line outputs may be provided using an RDL D-D2 equipped with two AMS-XLRMA jacks, available separately.\u003c\/p\u003e\n\u003cp\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.\u003c\/p\u003e\n\u003cp\u003eThe D-RN22 is a professional grade product with RDL mic preamplifiers for studio quality fidelity and low noise performance, coupled through XLR jacks housed in a steel chassis with a powder-coated or stainless-steel Decora front plate.\u003c\/p\u003e\n\u003cp\u003eThe D-RN22's superior performance specifications make it ideally suited to installations requiring network control and exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A. for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-Gang Dante or AES67 Network Interface for Two Audio Inputs and Two Audio Outputs\u003c\/li\u003e\n\u003cli\u003eTwo Front-Panel Mic\/Line Inputs on Balanced XLR Jacks\u003c\/li\u003e\n\u003cli\u003eTwo Balanced Rear-Panel Outputs on Detachable Wiring Block\u003c\/li\u003e\n\u003cli\u003eSoftware-Selected Input Gain; Mic: 35 dB, 42 dB or 59 dB; Line: Unity or 12 dB\u003c\/li\u003e\n\u003cli\u003eP48 Mic Phantom Selected by Software for Mic Inputs\u003c\/li\u003e\n\u003cli\u003eOutputs Equipped with Software-Controlled Attenuator in 1 dB Steps\u003c\/li\u003e\n\u003cli\u003eModule is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software\u003c\/li\u003e\n\u003cli\u003eCompatible with RDL Network Remote Controls\u003c\/li\u003e\n\u003cli\u003eHigh Resolution 24 Bit Analog to Digital and Digital to Analog Conversion\u003c\/li\u003e\n\u003cli\u003eLegendary RDL Studio Quality, Low-Noise Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eTYPICAL PERFORMANCE:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eNetwork Connector: RJ45 with Link and Speed indicators\u003c\/li\u003e\n\u003cli\u003eDigital Audio Ethernet Protocol: Dante or AES67\u003c\/li\u003e\n\u003cli\u003eTransmission Rate: 100 Mbps\u003c\/li\u003e\n\u003cli\u003eSample Rates Supported: 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz\u003c\/li\u003e\n\u003cli\u003eBit Depth Supported: 24 bits\u003c\/li\u003e\n\u003cli\u003eAudio Operating Level: -18 dBFS = +4 dBu\u003c\/li\u003e\n\u003cli\u003eReference Level: 0 dBFS = +22 dBu\u003c\/li\u003e\n\u003cli\u003eMic\/Line Inputs to Network Section:\u003c\/li\u003e\n\u003cli\u003eInputs (2): XLR (female)\u003c\/li\u003e\n\u003cli\u003eGain: Mic: 35 dB (LOW), 42 dB (MED), 59 dB (HIGH); Line: Unity (NORM), 12 dB (HIGH)\u003c\/li\u003e\n\u003cli\u003eInput Level (for +4 dBu\/-18 dBFS): Mic: -31 dBu (LOW), -38 dBu (MED), -55 dBu (HIGH); Line: +4 dBu (LOW), -8 dBu (HIGH)\u003c\/li\u003e\n\u003cli\u003eInput Level (maximum): Mic: -14 dBu (LOW), -21 dBu (MED), -38 dBu (HIGH); Line: +23 dBu (LOW), +10 dBu (HIGH)\u003c\/li\u003e\n\u003cli\u003eInput Impedance: \u0026gt; 1.2 kΩ\u003c\/li\u003e\n\u003cli\u003ePhantom Power: P48, software-selectable\u003c\/li\u003e\n\u003cli\u003eStandard for Phantom: IEC 61938: 2013\u003c\/li\u003e\n\u003cli\u003eSelectors per input (2): Phantom, Gain, software-selectable\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz (± 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: \u0026lt; -128 dBu (59 dB gain); \u0026lt; -130 dBu A-Weighted\u003c\/li\u003e\n\u003cli\u003eNoise below -18 dBFS (20 to 20 kHz): Mic: \u0026lt; -88 dB (LOW), \u0026lt; -82 dB (MED), \u0026lt; -68 dB (HIGH);\u003c\/li\u003e\n\u003cli\u003eLine: \u0026lt; -88 dB (NORM), \u0026lt; -88 dB (HIGH)\u003c\/li\u003e\n\u003cli\u003eTHD+N: \u0026lt; 0.1% (20 Hz to 20 kHz, +4 dBu\/-18 dBFS)\u003c\/li\u003e\n\u003cli\u003eCMRR: \u0026gt;65 dB (50 Hz to 120 Hz)\u003c\/li\u003e\n\u003cli\u003eCrosstalk: Below Noise Floor (20 Hz to 20 kHz at operating level, input to input, max. mic gain)\u003c\/li\u003e\n\u003cli\u003eNetwork to Line Outputs Section:\u003c\/li\u003e\n\u003cli\u003eOutputs (2): Balanced, detachable wiring block\u003c\/li\u003e\n\u003cli\u003eOutput Level (operating): +4 dBu (nominal) balanced\u003c\/li\u003e\n\u003cli\u003eOutput Level (maximum): +22 dBu balanced\u003c\/li\u003e\n\u003cli\u003eOutput Attenuator: Software-controlled, 0 to -63 dB and OFF (analog output per received network channel)\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 150 Ω balanced\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz (± 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eTHD+N: \u0026lt; 0.1%\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt; 0.01% (1 kHz)\u003c\/li\u003e\n\u003cli\u003eNoise: \u0026lt; -80 dB (below +4 dBu); \u0026lt; -100 dB (below +22 dBu)\u003c\/li\u003e\n\u003cli\u003eCrosstalk: Below Noise Floor (20 Hz to 20 kHz at operating level, output to output)\u003c\/li\u003e\n\u003cli\u003eHeadroom above +4 dBu: \u0026gt; 18 dB\u003c\/li\u003e\n\u003cli\u003eIndicators (4): Ethernet Link and Speed (2, rear panel); Sync and Power (2, front panel)\u003c\/li\u003e\n\u003cli\u003eAmbient Operating Environment: 0° C to 50° C\u003c\/li\u003e\n\u003cli\u003ePower Requirement: PoE Class 0, IEEE 802.3af\u003c\/li\u003e\n\u003cli\u003eSpecification Conditions: Gain\/Level: ± 1 dB; Source termination: 150 Ω; A to D values measured in digital domain\u003c\/li\u003e\n\u003cli\u003eDimensions:\u003cbr\u003e1.80\" (4.57 cm) W;\u003cbr\u003e4.11\" (10.44 cm) H;\u003cbr\u003e2.09\" (5.31 cm) D\u003c\/li\u003e\n\u003cli\u003ePackage Type: Cardboard Box\u003c\/li\u003e\n\u003cli\u003ePackage Dimensions:\u003cbr\u003e2.75\" (6.99 cm) x\u003cbr\u003e6.7\" (17.02 cm) x\u003cbr\u003e6.25\" (15.88 cm)\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 0.7 lbs. (0.32 kg)\u003c\/li\u003e\n\u003cli\u003eWEEE weight: 0.44 lbs. (0.2 kg)\u003c\/li\u003e\n\u003cli\u003eUS Tariff Code: 8543.70.9100\u003c\/li\u003e\n\u003cli\u003eEU Tariff Code: 8543.70.0600\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":45639063994546,"sku":"RDL DRN22","price":1056.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/files\/d-rn22-front.jpg?v=1752507065","url":"https:\/\/www.performanceaudio.com\/en-ca\/products\/rdl-d-rn22-wall-mounted-bi-directional-mic-line-dante-interface-2x2-white","provider":"Performance Audio","version":"1.0","type":"link"}