{"product_id":"radio-design-labs-dd-bn2ml-dante-interface-2-x-2-with-poe-white","title":"RDL DD-BN2ML Bi-Directional Mic\/Line Dante Interface 2x2 on Decora Plate (White)","description":"\u003cp\u003eBi-Directional Mic\/Line Dante Interface 2 x 2 with PoE - 1 XLR In and 1 Mini-jack In, 2 Out on Rear-Panel Terminal Block - White\u003c\/p\u003e\n\u003cp\u003eThe DD-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2ML is PoE powered, and is available in multiple finishes with optional customized graphics.\u003c\/p\u003e\n\u003cp\u003eThe XLR input is converted to feed one Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.\u003c\/p\u003e\n\u003cp\u003eThe Mini-jack left and right inputs are summed to mono to feed one Dante network transmit channel. This input provides a network digital audio level of -18 dBFS for an unbalanced -10 dBV input.\u003c\/p\u003e\n\u003cp\u003eTwo Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.\u003c\/p\u003e\n\u003cp\u003eThe rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2ML. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN2ML in a triple gang box or may be mounted remotely in a single box.\u003c\/p\u003e\n\u003cp\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.\u003c\/p\u003e\n\u003cp\u003eThe DD-BN2ML is a professional grade product with a discrete mic preamplifier for studio quality fidelity and low noise performance, coupled through a metal XLR jack housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates.\u003c\/p\u003e\n\u003cp\u003eThe DD-BN2ML's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDante Network Interface for Two Audio Inputs and Two Audio Outputs\u003c\/li\u003e\n\u003cli\u003eXLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block\u003c\/li\u003e\n\u003cli\u003eConverts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels\u003c\/li\u003e\n\u003cli\u003eConverts Two Dante Network Audio Signals to Line Level\u003c\/li\u003e\n\u003cli\u003eSpecial Software Not Required for Module Setup\u003c\/li\u003e\n\u003cli\u003eXLR Input is Switch Selectable for Mic or Line\u003c\/li\u003e\n\u003cli\u003eSwitch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB\u003c\/li\u003e\n\u003cli\u003eSwitch-Selectable 48 V Mic Phantom (P48)\u003c\/li\u003e\n\u003cli\u003eSwitch-Selectable Line Gain: Unity, 12 dB or 19 dB\u003c\/li\u003e\n\u003cli\u003eMini-jack -10 dBV Input is Summed to Mono\u003c\/li\u003e\n\u003cli\u003eEach Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV\u003c\/li\u003e\n\u003cli\u003eStudio Quality, Low-Noise Performance\u003c\/li\u003e\n\u003cli\u003eHigh Resolution 24 Bit Analog to Digital and Digital to Analog Conversion\u003c\/li\u003e\n\u003cli\u003eLegendary RDL Analog Filtering Enhances Superb Audio Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork Connector: RJ45 with Link and Speed indicators\u003c\/li\u003e\n\u003cli\u003eDigital Audio Ethernet Protocol: Dante\u003c\/li\u003e\n\u003cli\u003eTransmission Rate: 100 Mbps\u003c\/li\u003e\n\u003cli\u003eSample Rates Supported: 44.1 kHz, 48 kHz (default)\u003c\/li\u003e\n\u003cli\u003eBit Depth Supported: 24 bits\u003c\/li\u003e\n\u003cli\u003eAudio Operating Level: -20 dBFS = +4 dBu\u003c\/li\u003e\n\u003cli\u003eReference Level: 0 dBFS = +24 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMic\/Line Input to Network Interface\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eInput: XLR (female)\u003c\/li\u003e\n\u003cli\u003eGain: Mic: 40 dB (LO), 48 dB (MED), 62 dB (HI); Line: Unity (LO), 8 dB (MED), 19 dB (HI)\u003c\/li\u003e\n\u003cli\u003eInput Level (for +4 dBu\/-20 dBFS): Mic: -36 dBu (LO), -44 dBu (MED), -58 dBu (HI); Line: +4 dBu (LO), -8 dBu (MED), -15 dBu (HI)\u003c\/li\u003e\n\u003cli\u003eInput Level (maximum): Mic: -16 dBu (LO), -24 dBu (MED), -38 dBu (HI); Line: +24 dBu (LO), +12 dBu (MED), +5 dBu (HI)\u003c\/li\u003e\n\u003cli\u003eInput Impedance: \u0026gt; 2.5 kΩ (MIC); \u0026gt; 5 kΩ (LINE)\u003c\/li\u003e\n\u003cli\u003ePhantom Power: P48, 48 Vdc, switch-selectable\u003c\/li\u003e\n\u003cli\u003eStandard for Phantom: IEC 61938: 2013\u003c\/li\u003e\n\u003cli\u003eSelectors for input (3): Phantom, Mic\/Line, Gain\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz (± 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: -130 dBu (62 dB gain); -132 dBu A-Weighted\u003c\/li\u003e\n\u003cli\u003eNoise below -20 dBFS (20 to 20 kHz): Mic: \u0026lt; -72 dB (LO), \u0026lt; -72 dB (MED), \u0026lt; -68 dB (HI); Line: \u0026lt; -72 dB (LO), \u0026lt; -72 dB (MED), \u0026lt; -70 dB (HI)\u003c\/li\u003e\n\u003cli\u003eTHD+N: \u0026lt; 0.1% (20 Hz to 20 kHz, +4 dBu\/-20 dBFS); 0.015% at 1 kHz (typ)\u003c\/li\u003e\n\u003cli\u003eCMRR: \u0026gt; 65 dB (50 Hz to 120 Hz)\u003c\/li\u003e\n\u003cli\u003eCrosstalk: Below Noise Floor (20 Hz to 20 kHz at operating level, any input to any input, max. mic gain)\u003c\/li\u003e\n\u003cli\u003eHeadroom: 20 dB\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLine Input to Network Interface\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eInput: Mini-jack Stereo (left and right summed to mono)\u003c\/li\u003e\n\u003cli\u003eInput Level (for +4 dBu\/-20 dBFS): -10 dBV nominal\u003c\/li\u003e\n\u003cli\u003eInput Level (maximum): +10 dBV\u003c\/li\u003e\n\u003cli\u003eInput Impedance: \u0026gt; 50 kΩ\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz (± 0.2 dB)\u003c\/li\u003e\n\u003cli\u003eNoise below -20 dBFS (20 to 20 kHz): \u0026lt; -85 dB\u003c\/li\u003e\n\u003cli\u003eTHD+N: \u0026lt; 0.05% (20 Hz to 20 kHz, +4 dBu\/-20 dBFS); 0.01% at 1 kHz (typ)\u003c\/li\u003e\n\u003cli\u003eHeadroom: 20 dB\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eNetwork to Line Outputs\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eOutputs (2): Balanced, detachable terminal block\u003c\/li\u003e\n\u003cli\u003eOutput Level (operating): +4 dBu (nominal) balanced; -10 dBV (nominal) unbalanced, switch-selectable\u003c\/li\u003e\n\u003cli\u003eOutput Level (maximum): +24 dBu balanced; +10 dBV unbalanced\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 150 Ω balanced; 2.5 kΩ unbalanced\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz (± 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eTHD+N: \u0026lt; 0.1%\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt; 0.01% (1 kHz)\u003c\/li\u003e\n\u003cli\u003eNoise: \u0026lt; -80 dB (below +4 dBu or -10 dBV); \u0026lt; -100 (below +24 dBu)\u003c\/li\u003e\n\u003cli\u003eCrosstalk: Below Noise Floor (20 Hz to 20 kHz at operating level, output to output)\u003c\/li\u003e\n\u003cli\u003eHeadroom above +4 dBu or -10 dBV: 20 dB\u003c\/li\u003e\n\u003cli\u003eIndicators (4): Ethernet Link and Speed (2, rear panel); Sync and Power (2, front panel)\u003c\/li\u003e\n\u003cli\u003eAmbient Operating Environment: 0° C to 40° C; 30° C maximum recommended\u003c\/li\u003e\n\u003cli\u003ePower Requirement: PoE Class 0, IEEE 802.3af\u003c\/li\u003e\n\u003cli\u003eSpecification Conditions: Gain\/Level: ± 1 dB; Source termination: 150 Ω; A to D values measured in digital domain\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.52\" (8.94 cm) W; 4.11\" (10.44 cm) H; 2.09\" (5.31 cm) D\u003c\/li\u003e\n\u003cli\u003ePackage Type: Cardboard Box\u003c\/li\u003e\n\u003cli\u003ePackage Dimensions: 3.625 x 4.625 x 2.125 in.\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 1.0 lbs.\u003c\/li\u003e\n\u003cli\u003eWEEE weight: 0.845 lbs.\u003c\/li\u003e\n\u003cli\u003eTariff code: 8517.18.0050\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42494299701426,"sku":"RDL DDBN2ML","price":1103.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/products\/61017_sq.jpg?v=1753204351","url":"https:\/\/www.performanceaudio.com\/en-ca\/products\/radio-design-labs-dd-bn2ml-dante-interface-2-x-2-with-poe-white","provider":"Performance Audio","version":"1.0","type":"link"}