{"product_id":"dynacord-ipx20-4-multi-channel-power-amplifier-for-fixed-install-applications-4-x-5000w","title":"Dynacord IPX20:4 Multi-Channel Power Amplifier for Fixed Install Applications (4 x 5000W)","description":"\u003cp\u003eDSP Power Amplifier for Permanent Fixed Install Applications, 4 x 5000 Watts at 4 Ohms\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e4 x 5000 w multi-channel installation dsp class-d amplifier\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIPX series are dedicated amplifiers for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high-power multichannel amplifiers with sophisticated speaker processing. The integrated DSP can run either in 48 kHz or true 96 kHz including FIR Drive. Besides analog inputs also Dante and OCA via OMNEO network inputs are available. Comprehensive fallback options allow redundant scenarios.\u003c\/p\u003e \u003cp\u003eEach channel can be individually operated in low impedance mode, or 70V\/100V Direct Drive mode. By bridging also 140V\/200V Direct Drive is available. By the possibility to parallel two channels and parallel-bridge four channels all kind of loudspeakers can be driven.\u003c\/p\u003e \u003cp\u003eDue to the digitally controlled interleaved PFC supply reliable operation is ensured even under challenging mains supply situations. Reactive current is limited to a minimum, which reduces costs for mains installations and mains fusing in the installation.\u003c\/p\u003e \u003cp\u003eIn case of idle mode or light mode operation IPX series amplifiers automatically switch to a lower Eco Rail further reducing operating costs. In Eco Mode the amplifiers stay fully functional and supervised.\u003c\/p\u003e \u003cp\u003eWhile IPX series amplifiers are fully integrated in IRIS-Net, a OLED display on the front panel allows quick local control and supervision of the amplifier.\u003c\/p\u003e \u003cp\u003eThe connectivity of IPX series amplifiers is optimized for fixed install applications.\u003c\/p\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4 x 5000 W multi-channel installation DSP amplifier with digitally controlled PFC supply.\u003c\/li\u003e\n\u003cli\u003eFully integrated DSP with high-resolution 96 kHz processing and FIR Drive.\u003c\/li\u003e\n\u003cli\u003eDante and OCA integration via OMNEO with fallback options.\u003c\/li\u003e\n\u003cli\u003eParallel, bridged and parallel-bridged drive modes with 70\/100V\/140V\/200V and low impedance operation\u003c\/li\u003e\n\u003cli\u003eHigh efficiency Eco Rail technology for lower operating costs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNumber of Amplifier Channels: 4\u003c\/li\u003e\n\u003cli\u003eMaximum Output Voltage, Normal mode, per channel: 210 Vpeak\u003c\/li\u003e\n\u003cli\u003eMaximum Output Current, Normal mode, per channel: 84 Apeak\u003c\/li\u003e\n\u003cli\u003eAMPLIFIER\u003c\/li\u003e\n\u003cli\u003eVoltage Gain\u003c\/li\u003e\n\u003cli\u003eLow-Z mode, ref.1 kHz: 32.0 dB, adjustable 20.0-44.0 dB\u003c\/li\u003e\n\u003cli\u003eDirect Drive mode: 33.2\/36.2\/39.2 dB for 70\/100\/140 V\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity\u003c\/li\u003e\n\u003cli\u003eLow-Z mode, Max. Output Voltage: 13.7 dBu (3.73 V), adjustable 1.7-25.7 dBu\u003c\/li\u003e\n\u003cli\u003eDirect Drive mode: 6 dBu (1.55 V), fixed\u003c\/li\u003e\n\u003cli\u003eTHD 3 dB below max, AES17, 1 kHz: \u0026lt; 0.05 %\u003c\/li\u003e\n\u003cli\u003eDIM 100 3.15 kHz, 15 kHz: \u0026lt; 0.15 %\u003c\/li\u003e\n\u003cli\u003eIMD-SMPTE 60 Hz, 7 kHz: \u0026lt; 0.15 %\u003c\/li\u003e\n\u003cli\u003eCrosstalk ref. 1 kHz, 12 dB below Max, 8 Ω: \u0026lt; -80 dB\u003c\/li\u003e\n\u003cli\u003eFrequency Response ref. 1 kHz, analog in to speaker out: 20 Hz to 20 kHz (±1.0 dB)\u003c\/li\u003e\n\u003cli\u003eDamping Factor 20 Hz to 200 Hz, 8 Ω: \u0026gt; 400\u003c\/li\u003e\n\u003cli\u003eOutput Stage Topology: Class D, fixed frequency\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio Amplifier\u003c\/li\u003e\n\u003cli\u003eA-weighted, analog input: 115 dB\u003c\/li\u003e\n\u003cli\u003eA-weighted, digital input: 118 dB\u003c\/li\u003e\n\u003cli\u003eOutput Noise\u003c\/li\u003e\n\u003cli\u003eA-weighted, analog input: \u0026lt; -70 dBu\u003c\/li\u003e\n\u003cli\u003eA-weighted, digital input: \u0026lt; -73 dBu\u003c\/li\u003e\n\u003cli\u003eCONNECTIVITY\u003c\/li\u003e\n\u003cli\u003eAnalog Audio Input\/Thru\u003c\/li\u003e\n\u003cli\u003eType: 2 x 6-pin Euroblock, male\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +21 dBu\u003c\/li\u003e\n\u003cli\u003eInput Impedance, active balanced: 20 kΩ\u003c\/li\u003e\n\u003cli\u003eReference level equal to digital input: +21 dBu for 0 dBFS\u003c\/li\u003e\n\u003cli\u003eSpeaker Output: 1 x 8-pin Euroblock, 6 mm, female\u003c\/li\u003e\n\u003cli\u003eGENERAL\u003c\/li\u003e\n\u003cli\u003ePower Consumption\u003c\/li\u003e\n\u003cli\u003eRated power consumption (see BTU table): 2250 W\u003c\/li\u003e\n\u003cli\u003e1\/8 Maximum Output Power at 4 Ω: 2850 W\u003c\/li\u003e\n\u003cli\u003eIdle Mode (no input signal): 110 W\u003c\/li\u003e\n\u003cli\u003eStandby Mode: \u0026lt; 19 W\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D), mm: 483 x 88.1 x 514.2\u003c\/li\u003e\n\u003cli\u003eWeight: 18.3 kg (40.3 lb)\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 20.5 kg (45.1 lb)\u003c\/li\u003e\n\u003cli\u003eDIGITAL SIGNAL PROCESSING\u003c\/li\u003e\n\u003cli\u003eSampling rate: 48 kHz\/96 kHz, OMNEO\/Dante synchronized\u003c\/li\u003e\n\u003cli\u003eSignal delay\/latency Analog In to Speaker Out, 48 kHz\/96 kHz: 0.70 ms\/0.53 ms\u003c\/li\u003e\n\u003cli\u003eDante Network Latency: typ. 1.00 ms\u003c\/li\u003e\n\u003cli\u003eSignal Processing\u003c\/li\u003e\n\u003cli\u003eUser EQ: 12 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass \u0026amp; Notch; 2 filters of them with additional asymmetric filter type\u003c\/li\u003e\n\u003cli\u003eUser Delay: 0 to 2000 ms per channel (units: μs, ms, s, cm, m, inches, feet)\u003c\/li\u003e\n\u003cli\u003eArray EQ: 5 filters per channel, selectable as PEQ, Lo- Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass, \u0026amp; All-Pass\u003c\/li\u003e\n\u003cli\u003eArray Delay: 0 to 500 ms per channel (units: μs, ms, s, cm, m, inches, feet)\u003c\/li\u003e\n\u003cli\u003eSpeaker EQ: 10 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Hi-Pass, Lo-Pass \u0026amp; All-Pass\u003c\/li\u003e\n\u003cli\u003eSpeaker X-Over: Hi-Pass, \u0026amp; Lo-Pass per channel, 6\/12\/18\/24\/30\/36\/42\/48 dB Bessel\/Butterworth, 12\/24\/48 dB Linkwitz-Riley; Alignment Delay, 0 to 20 ms per channel\u003c\/li\u003e\n\u003cli\u003eSpeaker FIR: Up to 1025 taps, Linear Phase Filter, Linear Phase Brickwall X-Over\u003c\/li\u003e\n\u003cli\u003eSpeaker Limiters: Peak Anticipation Limiter \u0026amp; RMS\/TEMP Limiter per channel\u003c\/li\u003e\n\u003cli\u003eOther Functions: Source Selection \u0026amp; Mix, Level, Mute, Polarity, Sine \u0026amp; Noise Generator, Pilot Tone Generator \u0026amp; Detection, Level Meters, Impedance Measurement \u0026amp; Load Monitoring\u003c\/li\u003e\n\u003cli\u003eMemory\u003c\/li\u003e\n\u003cli\u003eDSP Presets: 1 Factory + 20 User\u003c\/li\u003e\n\u003cli\u003eSpeaker-Pool Presets: 30 Speaker Settings\u003c\/li\u003e\n\u003cli\u003eSource Supervision \u0026amp; Fallback: Pilot Tone supervision at Analog \u0026amp; OMNEO\/ Dante inputs, switchover to alternative Source Selection\u003c\/li\u003e\n\u003cli\u003eCONNECTIVITY\u003c\/li\u003e\n\u003cli\u003eNetwork\u003c\/li\u003e\n\u003cli\u003eType: 2 x Neutrik EtherCON\/RJ45, redundant PRIMARY\/SECONDARY\u003c\/li\u003e\n\u003cli\u003eGeneral: 1000base-T\/100base-TX, integrated switch\u003c\/li\u003e\n\u003cli\u003eNetwork Audio Inputs: 8 channels, 48\/96 kHz, OMNEO\/Dante format\u003c\/li\u003e\n\u003cli\u003eNetwork Audio Outputs (Monitor): 2 channels, 48\/96 kHz, OMNEO\/Dante format\u003c\/li\u003e\n\u003cli\u003eMains Input: 1 x Neutrik powerCON-HC\u003c\/li\u003e\n\u003cli\u003eGPIO Control Port:\u003c\/li\u003e\n\u003cli\u003eType: 1 x 8-pin Euroblock, male\u003c\/li\u003e\n\u003cli\u003ePorts \u0026amp; Operating Modes: 3 x GPIO, switchable Analog In\/Digital In\/Digital Out\u003c\/li\u003e\n\u003cli\u003eAnalog Input Range: 0 V to +13 V, 40 kΩ input resistance\u003c\/li\u003e\n\u003cli\u003eDigital Input Limits: ON: \u0026lt; 1.5 V: OFF: \u0026gt; 2.0 V, internal Pull Up (10 kΩ)\u003c\/li\u003e\n\u003cli\u003eDigital Outputs: ON: Output switched to GND, max. 200 mA: OFF: Open Collector (40 kΩ to GND)\u003c\/li\u003e\n\u003cli\u003eReference Voltage Output: +10 V, max. 200 mA, supervised, short circuit protected\u003c\/li\u003e\n\u003cli\u003eREADY\/FAULT contact: Galvanic isolated relay, max. 30 VDC\/500 mADC\u003c\/li\u003e\n\u003cli\u003eGENERAL\u003c\/li\u003e\n\u003cli\u003eUser Interface\u003c\/li\u003e\n\u003cli\u003eDisplay: Black\/white OLED 256 x 64 pixel\u003c\/li\u003e\n\u003cli\u003eFront panel indicators: 4 x status LEDs (POWER, STANDBY, FAULT, OMNEO)\u003c\/li\u003e\n\u003cli\u003eFront panel operating elements: 3 buttons (UP, ENTER, DOWN)\u003c\/li\u003e\n\u003cli\u003eRear panel indicators: 1 x status LED (STATUS)\u003c\/li\u003e\n\u003cli\u003eRear panel operating elements: Mains Switch\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 100 V to 240 V, 50 Hz to 60 Hz AC\u003c\/li\u003e\n\u003cli\u003ePower Supply Topology: Switching Mode Power Supply with digital controlled Power Factor Correction\u003c\/li\u003e\n\u003cli\u003eProtections: Audio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over-\/Under voltage Protection\u003c\/li\u003e\n\u003cli\u003eCooling: Front-to-rear, temperature controlled fans, supervised\u003c\/li\u003e\n\u003cli\u003eAmbient Temperature Limits: +5 °C to +40 °C (+40 °F to +105 °F)\u003c\/li\u003e\n\u003cli\u003eIEC Protection Class: Class I (grounded)\u003c\/li\u003e\n\u003cli\u003eElectromagnetical Environment: E1, E2, E3\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eAmplifier at rated conditions, Low-Z Normal operation mode, all channels driven, 4 Ω loads, Analog input, 32 dB Gain, 48 kHz sample rate, unless otherwise specified.\u003c\/li\u003e\n\u003cli\u003e¹Test signal for max. output power according IHFA-202 (Dynamic-Headroom, burst 1 kHz\/20 ms on\/480 ms off\/low level -20 dB).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":42498710536370,"sku":"EV IPX204","price":22043.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/products\/ipx20-4_persp_right_2400px.jpg?v=1665788570","url":"https:\/\/www.performanceaudio.com\/en-ca\/products\/dynacord-ipx20-4-multi-channel-power-amplifier-for-fixed-install-applications-4-x-5000w","provider":"Performance Audio","version":"1.0","type":"link"}