{"product_id":"custom-cables-xlr-to-1-4-trs-balanced-cable-made-from-mogami-w2792-neutrik-connectors","title":"Custom Cables XLR to 1\/4\" TRS Balanced Cable Made from Mogami W2792 \u0026 Neutrik Connectors","description":"\u003ch2\u003eCustom Mogami W2792 XLR-to-1\/4-Inch TRS Balanced Audio Cable\u003c\/h2\u003e\n\u003cp\u003eConnect compatible balanced audio equipment with a cable built to fit your setup. Performance Audio custom builds this XLR-to-1\/4-inch TRS assembly using Mogami W2792 Superflexible Low Microphonic Mic Cable and genuine Neutrik connectors. Available in black, with custom labeling and finishing options to keep your signal paths organized from setup through teardown.\u003c\/p\u003e\n\u003ch3\u003eOne Cable, One Balanced Audio Channel\u003c\/h3\u003e\n\u003cp\u003eUse this cable between compatible balanced outputs and inputs on equipment such as mixers, audio interfaces, signal processors, and powered monitors. Choose the XLR gender and connector configuration required by your equipment. The cable can carry a signal in either direction when its connector configuration and wiring match the source and destination.\u003c\/p\u003e\n\u003cp\u003eIn this application, the TRS connector carries one balanced mono channel, not separate left and right stereo channels. This is not a stereo headphone cable, insert breakout, or stereo-to-mono summing cable. A TRS socket can serve different functions, so check its intended use rather than relying on connector fit alone.\u003c\/p\u003e\n\u003cp\u003eMatch signal levels as well as connectors. This passive cable does not amplify a microphone, convert mic level to line level, balance an unbalanced output, or provide electrical isolation. A microphone connected to a TRS input still requires an input designed for that microphone's signal and power requirements. This is an analog audio cable, not an AES\/EBU digital cable or an amplifier-to-passive-speaker cable.\u003c\/p\u003e\n\u003ch3\u003eBuilt Around Mogami W2792\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami W2792 Superflexible Low Microphonic Mic Cable:\u003c\/strong\u003e the specified wire for this custom balanced analog audio assembly, with a flexible cable choice for live-use setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Neutrik connectors:\u003c\/strong\u003e XLR and 1\/4-inch TRS connections according to your selected build options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack cable only:\u003c\/strong\u003e use custom labeling to distinguish channels and destinations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom labeling and finishing options:\u003c\/strong\u003e make connections easier to identify during setup and troubleshooting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom made to order with a lifetime warranty:\u003c\/strong\u003e a Performance Audio assembly built for your specified requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck Wiring and Power Requirements\u003c\/h3\u003e\n\u003cp\u003eConfirm the equipment's pinout and any nonstandard wiring requirements before ordering. Balanced operation depends on the connected equipment and correct wiring throughout the signal path; changing connector types alone does not create a balanced connection.\u003c\/p\u003e\n\u003cp\u003eDo not assume an XLR-to-TRS connection provides phantom power. Follow the equipment manufacturer's instructions and disable phantom power where it is not required or supported. Mute or turn down monitoring before making or removing connections, and avoid plugging or unplugging a TRS connection while phantom power is present.\u003c\/p\u003e\n\u003ch3\u003ePlan the Run Before You Order\u003c\/h3\u003e\n\u003cp\u003eMeasure along the actual cable route, allowing slack for strain relief and equipment access without unnecessary excess. Check connector gender, clearance around adjacent sockets, and space for connector bodies and cable exits. Support the cable so it does not pull on equipment sockets, and avoid sharp bends and pinch points. For live setups, plan routes that keep cables out of foot traffic or provide appropriate cable protection.\u003c\/p\u003e\n\u003cp\u003eRoute away from AC cables and power transformers where practical. After installation, verify the intended input and output settings and test the connection at a low listening level before normal use.\u003c\/p\u003e\n\u003ch3\u003eNeed a Different Configuration?\u003c\/h3\u003e\n\u003cp\u003eContact Performance Audio's custom cable specialists with your equipment models, intended connections, XLR gender, and required length. We can help you specify a different connector combination or an application-specific build you cannot configure online.\u003c\/p\u003e","brand":"Custom Cables","offers":[{"title":"Default Title","offer_id":67900196454578,"sku":"CUS XLRTRS2792","price":15.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/products\/64886_sq_1_1.jpg?v=1665776976","url":"https:\/\/www.performanceaudio.com\/en-ca\/products\/custom-cables-xlr-to-1-4-trs-balanced-cable-made-from-mogami-w2792-neutrik-connectors","provider":"Performance Audio","version":"1.0","type":"link"}