Key Features
- Cardioid Polar Pattern
- Condenser Element
- 50Hz-25kHz Frequency Response
- High SPL Handling
- For Live & Recording Applications
- Transparent Sound Quality
- Includes Mic Clip & Case
Description
Cardioid Condenser Microphone for Recording and Live Performance - 50Hz to 25kHz
Earthworks cardioid microphones are unlike all the rest, as they have patented near-perfect cardioid patterns. The sound across the entire front hemisphere is remarkably uniform and is flatter at 90 degrees than most microphones are on-axis. This results in uncolored off-axis rejection for recording and greater gain before feedback for live sound. They effortlessly handle up to 145dB SPL while simultaneously revealing subtle details that other microphones mask. All SR models are a superb value and will provide excellent results for both live performance and recording applications. The SR25 was specifically designed for drums and is also ideal for a wide variety of other instruments. It's high frequency response goes to 25kHz and costs less than the SR30. The SR25 is an integral part of our DK25/L DrumKit System.
Models
SR25 25kHz multi-purpose cardioid condenser microphone
SR25mp 25kHz multi-purpose cardioid condenser microphone - matched pair
Features:
- Extended frequency response to 25kHz
- Multi-purpose cardioid microphone
- More gain before feedback than other microphones
- Less leakage
- Textbook perfect cardioid polar pattern with natural on- and off-axis performance
- Provides excellent results for both live performance and recording applications
- Extreme accuracy in the time domain for faithful reproduction and no smearing or distortion
- Transparent sound quality
- Shorter diaphragm settling time to prevent quieter attacks from being blurred by earlier louder attacks
Specifications:
- Frequency Response: 50Hz - 25kHz +/-2dB at 6 inches (15cm)
- Polar Pattern: Cardioid
- Sensitivity: 10mV/Pa (-40dBV/Pa)
- Power Requirements: 48V Phantom, 10mA
- Max Acoustic Input: 145dB SPL
- Output: XLR (pin 2+)
- Output Impedance: 100Ω, balanced (50Ω ea. pin 2 & 3)
- Min Output Load: 600Ω between pins 2 & 3
- Noise: 22dB SPL equivalent (A weighted)
- Dimensions L x D: 165mm x x 22mm (6.5 x .860 inches)
- Weight: .35 lb (160g)