DPA d:dicate 2011ES Twin Diaphragm Cardioid Microphone with Side Cable

d:dicate 2011E Twin Diaphragm Cardioid Microphone with Side Exit Active Cable

d:dicate 2011E Twin Diaphragm Cardioid Microphone, Active Cable

2011ER Twin Diaphragm Cardioid Microphone, Rear Cable
2011ES Twin Diaphragm Cardioid Microphone, Side Cable

2011E is part of the flexible DPA d:dicate Recording Microphones series. The 2011E with the MMP-E active cable offers an ultra-compact appearance with excellent directivity control and Radio Frequency Interference rejection.
2011E is ideal for over-stage hanging or table applications and the construction combines the Twin Diaphragm Capsule and DPA's strong know-how within interference tube technology.

While the DPA 4011 cardioid has gained worldwide admiration for its total linearity at all sound confrontations, the 2011 is purposely designed differently; the off-axis response is still linear but in a smaller frequency bandwidth making stage separation and gain-to-feedback higher and mic level easier to control.

At any time and with no tools necessary it is possible to transform the basic 2011 microphone into a new configuration by combining it with another DPA microphone capsule or preamp.

Twin Diaphragm Capsule: cutting edge technology
The overall distinctive sound image from the DPA miniatures is so well balanced that it meets the high demands of the DPA Reference Standard league.

In a 2011 capsule two opposite facing miniature capsules are custom re-built into a double diaphragm, one-capsule composition.
The use and control of interference tubes has become a DPA specialty and the 2011 is no exception; the capsules are loaded to the supreme Reference Standard preamps instead of the tiny miniature FET preamp from the 4060 miniature series, offering even more air and precision.

Stage addict
The 2011E has found its use on numerous stages and studios requiring visual elegance. Exhibiting a previously unheard blend of clarity, richness and dynamic range, the 2011 performs like a much more exclusive microphone and redefines the term value for money.

Features:

• Blends clarity, richness and dynamics
• Twin-Diaphragm capsule and interference tube technologies
• Superb isolation and level control for hanging or table use
• Modular flexibility

Specifications:

• Directional pattern: Cardioid
• Principle of operation: Pressure gradient, with interference tube
• Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
• Frequency range: 20 Hz - 20 kHz
• Frequency range, ± 2 dB, at 30 cm: 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz
• Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
• Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A)
• Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak
• Dynamic range: Typ. 117 dB
• Max. SPL, peak before clipping: 144 dB
• Output impedance: 100 Ω
• Minimum load impedance: 2 kΩ
• Cable drive capability: 100 m (328 ft)
• Output balance principle: Impedance balancing
• Common Mode Rejection Ratio (CMRR): > 40 dB
• Power supply (for full specifications): 48 V Phantom power (± 4 V)
• Current consumption: 3.5 mA
• Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Color: Matte black
• Weight: 115 g (4 oz)
• Microphone diameter: 19 mm (0.75 in)
• Output voltage, RMS: 2.2 V
• Polarity: +V at pin 2 for positive sound pressure
• Relative Humidity (RH): Up to 90%