Key Features
- 2 x 4041-SP Omnidirectional Mics
- Total Transparency
- Detailed High-Frequency Character
- For Live Sound & Recording
- Transparent Output Stage
Description
d:dicate 3532-SP Large Diaphragm Stereo Kit with 4041-SP Microphones
The 3532-SP is a complete state-of-the-art A-B Stereo Kit with two 4041-SP microphones, carefully matched within ±0,5 dB on both frequency response and sensitivity in the microphone's entire frequency bandwidth.
It is the ultimate choice for the demanding engineer and audio purist who emphasizes clarity, openness, precision, low self-noise and high sensitivity.
The kit is designed for a broad range of uses, mainly as main pair for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more. You get a bright and transparent sound quality with lots of headroom. With its soft boost, which is present on-axis, and gradually goes towards linearity off-axis, the 4041-SP omni microphone can be angled to use as a natural equalizer.
Features:
- the ultimate choice for the demanding engineer and audio purist
- a complete state-of-the-art A-B Stereo Kit
- designed for a broad range of uses
Specifications:
- Directional characteristics: Omnidirectional
- Principle of operation: Pressure
- Cartridge type: 24 mm (1 in) condenser w. stainless steel diaphragm
- Frequency range, +/- 2 dB: 20 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
- Equivalent noise level, A-weighted: Max. 8 dB(A) re. 20 µPa
- Equivalent noise level, ITU-R BS.468-4: Max 20 dB
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 86 dB
- Total Harmonic Distortion (THD): <0.5% up to 120 dB SPL peak, <1% up to 126 dB SPL peak
- Dynamic range: Typ. 118 dB
- Max. SPL, peak before clipping: 134 dB
- Output impedance: <200 Ohm
- Cable drive capability: Up to 100 m (328 ft)
- Power supply: 48 V Phantom power
- Connector: 3-pin XLR-M (Standard P48)
- Weight: 190 g (6.7 oz)
- Capsule diameter: 24 mm (1 in)
- Microphone length: 170 mm (6.69 in)
- Matching tolerance (frequency response and sensitivity): ±0.5 dB (20 Hz - 20 kHz)
- Phase deviation for kit: < 5°
Includes:
- 2 x 4041-SP Large Diaphragm Microphone, P48, factory-matched
- 2 x DUA0021 Foam Windscreeen
- 1 x UA0836 Stereo Boom with Holders
- 1 x DYS0917 Thread Adapter for Stereo Boom
- 2 x UA0961 Microphone Holder