Description
Wall Mount DMX512 Combiner, Four Inputs, One Output, Isolated, Terminal Blocks, In Junction Box
These DMX combine units are designed for use in permanent installations and can accept as many as six DMX512 inputs. They can be mounted directly on a wall or can be mounted in a 12"x12"x4" junction box if conduit entries are required. DMX connections are made with pluggable terminal blocks and the power connection can be plugged into a wall outlet or into a terminal strip. All DMX512 inputs are optically isolated and terminated. These combiners can also be used to convert or accept Colortran's CMX protocol.
Specifications:
- Baud rate: 250 Kilobaud
- Input circuit: EIA-485 receiver with 120 ohm termination between +data and -data
- Input connectors: Gold plated 5 pin male (Neutrik D1 series)
Terminal Block Optional - Output circuit: EIA-485 driver
- Output connector: Gold plated 5 pin female (Neutrik D1 series)
Terminal Block Optional - Input to output delay: 1/100 second average 1/50 second maximum
- Power input: 100 - 120 volts, 50/60 hertz, 12 watts
(208 - 240 volt optional) - Power cord: Attached 5' 18/3 cord with parallel blade w/ ground plug.
- Color: Silver hammertone with black front and back panels.
- Size and weight:
Table Top
11.25" deep, 1.74" high, 8.25" wide, 4.9 pounds
(19" Rack Kits Available)
Wall Mount
2" deep, 8.5" high, 10.5" wide, 5 pounds
Mounting Hole Locations 6" Vertical 9.5" Horizontal