Community C6 6.5" Coaxial 2-Way Ceiling Loudspeaker (White)
PA SKU # COM C6 MFR # C6 UPC # 617174015312
-
Lifetime Tech Support -
Best Seller! -
Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
- Product Highlights
- Easy Installation
- High Intelligibility
- Uniform Coverage & Voicing
- 8 ohm or 70V/100V Operation
6.5-Inch Coaxial Two-Way Ceiling Loudspeaker, White
The C6 has a more focused dispersion and a greater low frequency extension than the smaller C4. It contains a proprietary Tru-Phase waveguide that produces a consistently wide conical polar response up to 16 kHz. The C6 features a genuine coaxial design using separate magnets for the LF and HF drivers for reduced distortion and high sensitivity, thereby permitting up to 3 dB greater output level while requiring up to half the amplification power of competing products. The C SERIES ceiling loudspeakers are all ETL listed, and have similar sensitivity and output capabilities.
- High intelligibility with exceptional uniform coverage
- Consistent, wide dispersion up to 16 kHz
- True coaxial loudspeakers with HF compression drivers
- Tru-Phase high-frequency waveguide
- Spring loaded Drop-Stop installation assistant tabs support the back can on the included rails simplify installation
- Uniquely designed tile bridge support rails prevent ceiling tile sagging
- External loop-through Euroblock connectors
- Rear cover with integrated cable clamp (strain relief) and optional conduit knockout
- Face-mounted adjustable tap position selector switch
- Selectable 8 ohm or 70V/100V operation
- Loudspeaker Type: Two-way, full-range, coaxial ceiling loudspeaker, 8 ohm or 70V/100V operation
- Operating Range: 70 Hz - 13.5 kHz (-10 dB)
- Frequency Response: 115 Hz - 12.5 kHz (-3 dB)
- Max Input Ratings (8 ohm): 60W continuous, 150W program 21.9 volts RMS, 43.8 volts momentary peak
- Transformer Taps
- 70V: 30W, 15W, 7.5W, 3.75W, and 8 ohm selectable
- 100V: 30W, 15W, 7.5W, and 8 ohm selectable
- Distortion-10% Full Power: 1% Full Power
- 2nd Harmonic 3rd Harmonic 2nd Harmonic 3rd Harmonic
- 500 Hz: 0.33% 0.55% 0.25% 0.06%
- 2 kHz: 1.11% 0.80% 0.67% 0.23%
- 8 kHz: 2.49% 0.21% 0.30% 0.06%
- Sensitivity (1W/1m)
- 91 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands)
- 91 dB SPL (250 Hz to 4 kHz speech range)
- Maximum Output
- 8Ω: 109 dB SPL / 115 dB SPL (peak)
- 70V: 106 dB SPL / 112 dB SPL (peak)
- 100V: 106 dB SPL / 112 dB SPL (peak)
- Nominal Impedance: 8 ohms
- Minimum Impedance: 7 ohms @ 10 kHz
- Nominal Coverage:
- 120º conical (1 kHz to 6 kHz ±65°)
- 120° conical (500 Hz to 6 kHz ±65°)
- Axial Q / DI: 4.9/6.9, 500 Hz to 6 kHz
- Crossover Frequency: 2 kHz
- Recommended Signal Processing: 100 Hz, at 24 dB per octave high pass filter
- Drivers:
- LF 1 x 6.5-inch cone
- HF 1 x ¾-inch exit compression driver
- Driver Protection: Self-resetting solid state circuit breaker
- Input Connection: 4-pole Euroblock connector with two pair of non-interrupt parallel connections
- Controls: Front-face wattage / low impedance selector switch
- Enclosure: Corrosion-resistant zinc plated steel
- Finish: White or black
- Mounting/Rigging Provisions: 2 ABS mounting clamps with 1.75-inch grip range
- Grille: Powder coated steel with safety line, white or black finish, paintable
- Baffle: Reflex loaded UL 94V-0 rated ABS
- Safety Features: 2 x safety hang points
- Safety Agency Ratings: ETL listed to comply with UL1480, UL2043 and CSA60065. Suitable for use in air handling spaces per NFPA 70 and NFPA 90.
- Required Accessories: Electronic high pass filter
- Supplied Accessories: Tile support bridge rails, grille, paint mask, cut-out template, flat screwdriver
- Optional Accessories
- C6-CATR Can Adapter / Trim Ring (white)
- C6-CATR-B Can Adapter / Trim Ring (black)
- C6-NCB New Construction Bracket
- Dimensions - Width: 9.80 inches (248.9 mm) bezel diameter
- Depth: 6.49 inches (164.8 mm) can depth
- Cutout Diameter: 8.86 inches (225 mm)
- Weight: 7.1 lbs (3.2 kg)
Write Your Own Review
More from Community
