November & December Free Shipping on All Orders!
$2,475.00
Out of stock

Clear Com HRM-4X HelixNet Remote Station

PA SKU # CCM HRM4X MFR # HRM-4X
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
  • 4-Channel HelixNet Remote Station

4-Channel HelixNet Remote Station

The HRM-4X is a 4-channel 1RU digital partyline headset and speaker Remote Station that connects to HelixNet HMS-4X Main Stations and other HelixNet user stations over a single shielded twisted-pair cable. The HRM-4X can be locally powered via an external power supply or third party Power-over-Ethernet (PoE) power source.

Use our Digital Partyline Calculator to calculate the maximum acceptable cable length for a Clear-Com Digital Partyline System.

New in Version 3.0 (Available Now)
Optional Channel Expansion License
- Increase channel density by an additional 12 channels for a total of 24 channels on a single main station
Core Confirguration Manager (CCM)
- Robust browser-based configuration tool
User Roles
- Save favorite audio settings and key assignments for any device
Stacked Keys
- Assign multiple channels to a single beltpack key
USB Flasher
- Beltpacks can be configured as a call light by making a connected USB light glow steady or blink
  • For use with the HMS-4X HelixNet Main Station
  • Access to all networked channels of audio
  • Up to 12 networked channels of audio
  • Powered by Powerline, Power-over-Ethernet (PoE), or AC/DC universal adapter
  • Rotary channel level controls
  • Line/LAN status indication
  • dBu is an absolute measurement. 0 dBu is referenced to 0.775 volts RMS.
  • Channels
  • Four local from any networked Main Station
  • One local and any networked program audio feeds (Assignable to intercom channels)
  • Connectors
  • Intercom Line: (1) 3-pin XLR-M, (1) 3-pin XLR-F
  • Ethernet/PoE: Ethercon RJ-45
  • Headset: 4-pin XLR-M
  • Gooseneck Mic: 3-pin Tuchel
  • USB: Type A
  • Program: 3-pin XLR-F
  • SA (Stage Announce): 3-pin XLR-M
  • Hot Mic/IFB Interface: 1/4" (0.64 cm) phone jack
  • GPIO: 9 way D-type male (1xGPI, 1xGPO)
  • DC Power: 3-pin to AC adapter (provided)
  • Microphone Pre-amplifier
  • Headset Mic
  • Impedance: 200Ω (Dynamic)
  • Headset Mic Voltage: 1.7V (Electret selectable)
  • Limiter: +23dB
  • The following specified for a route to four-wire output at 0dBu out:
  • Mic Gain: 60dB (Dynamic), 45dB (Electret)
  • Frequency Response: 300Hz - 10 kHz ±3dBContoured for Intelligibility
  • Distortion: <0.2% THD @ 1kHz
  • Noise: <-55dBu (Dynamic), <-65dBu (Electret)
  • Headphone Amplifier
  • Load Impedance: >32Ω
  • Output Level: +12dBu before clipping
  • Sidetone: -12dBu (selectable)
  • Max Power: 5W
  • The following specified for a route from a four-wire input at 0dBu in:
  • Max Gain: 0dB
  • Frequency Response: 180Hz - 11kHz +3dB
  • Distortion: <0.1% THD @ 1kHz
  • Noise: <-65dBu
  • Headphone Limiter: 0dBu (selectable)
  • Loudspeaker Amplifier
  • Load Impedance: 8Ω
  • Output Level: +18dBu before clipping
  • The following specified for a route from a four-wire input at 0dBu in:
  • Max Gain: 18dB
  • Frequency Response: 200Hz - 10kHz ±3dB
  • Distortion: <0.1% THD @ 1kHz
  • Noise: <-50dBu
  • Program Line Input
  • Maximum Level Before Clipping: 18dBu
  • Nominal Input Level: 0dBu (selectable)
  • Input Impedance: >= 10KΩ
  • The following specified for a route to four-wire output at 0dBu out:
  • Frequency Response: 20Hz - 10kHz ±3dB
  • Distortion: <0.2% THD @ 1kHz
  • Noise: <-65dBu
  • Stage Announce Output
  • Maximum Level Before Clipping: 18dBu
  • Nominal Output Level: 0dBu (selectable)
  • Output Impedance: <= 100Ω
  • The following specified for a route from a dynamic headset:
  • Frequency Response: 300Hz - 12kHz ±3dB
  • Distortion: <0.1% THD @ 1kHz
  • Noise: <-55dBu
  • Hot Mic Output
  • Maximum Level Before Clipping: 12dBu
  • Nominal Output Level: 0dBu (selectable)
  • Output Impedance: <= 100Ω
  • The following specified for a route from a dynamic headset:
  • Frequency Response: 300Hz - 12kHz ±3dB
  • Distortion: <0.2% THD @ 1kHz
  • Noise: <-55dBu
  • Main Power
  • Via AC Adapter
  • Input Voltage Range: 100 - 240VAC
  • Input Frequency Range: 50 - 60Hz
  • Input Power: <= 250VAC
  • AC Adapter Power
  • Connector: IEC60320-1-C14
  • Via Power over Ethernet (PoE):
  • Connector: RJ-45
  • Conforms to PoE
  • standard: IEEE 802.3af-2003
  • Power Required: 13W
  • Environmental
  • Max temperature is 40ºC (104ºF)
  • 0 - 90% relative humidity
  • Dimensions
  • 19" W x 1.75" H x 6.4" D
  • (483 mm x 44 mm x 165 mm)
  • Weight
  • 4 lbs (1.8kg)
Write Your Own Review
You're reviewing:Clear Com HRM-4X HelixNet Remote Station
Your Rating
Performance Audio, LLC BBB Business Review Copyright © 2018. All rights reserved. Follow us on Facebook Follow us on Twitter Follow us on Instagram Follow us on YouTube Follow us on Pinterest Follow us on Google+