Audio-Technica AT2022 X/Y Stereo Microphone

PA SKU # AT AT2022 MFR # AT2022 UPC # 4961310112448
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • Pivoting X/Y Stereo Capsules
  • 90° or 120° Stereo Operation
  • Battery Operation
  • Switchable Low-frequency Roll-Off
  • Included Fuzzy Windscreen

X/Y Stereo Condenser Microphone

The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.
  • X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
  • Provides the spatial impact and realism of a live sound field
  • Battery operation allows use with most recording devices
  • Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
  • User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns
  • Ideal for general stereo recording and field sound capture
  • Excellent channel separation
  • Included fuzzy windscreen offers excellent wind protection
  • ELEMENTS: Fixed-charge back plate, permanently polarized condenser
  • POLAR PATTERN: X/Y Stereo
  • FREQUENCY RESPONSE: 20-20,000 Hz
  • LOW FREQUENCY ROLL-OFF: 150 Hz, 6 dB/octave
  • OPEN CIRCUIT SENSITIVITY: -41 dB (8.9 mV) re 1V at 1 Pa
  • CHANNEL BALANCE: <2.5 dB
  • IMPEDANCE: 200 ohms
  • MAXIMUM INPUT SOUND LEVEL: 122 dB SPL, 1 kHz at 1% T.H.D.
  • DYNAMIC RANGE (TYPICAL): 103 dB, 1 kHz at Max SPL
  • SIGNAL-TO-NOISE RATIO: 75 dB, 1 kHz at 1 Pa
  • BATTERY TYPE: 1.5V AA/UM3
  • WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
  • BATTERY CURRENT / LIFE: 1.2 mA / 500 hours typical (alkaline)
  • SWITCH: Off, on/flat, on/roll-off
  • WEIGHT: 270 g (9.5 oz)
  • DIMENSIONS: 192.0 mm (7.56") long,
  • 65.0 mm (2.56") maximum head diameter,
  • 21.0 mm (0.83") body diameter
  • OUTPUT CONNECTOR: Integral 3-pin XLRM-type
  • CABLE: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
  • ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch
Write Your Own Review
You're reviewing:Audio-Technica AT2022 X/Y Stereo Microphone
Your Rating