Atlas Sound TSD-PA10VG 10W Mono 4 Ohm/25V/70.7V/100V Power Amplifier

PA SKU # ATL TSDPA10VG MFR # TSD-PA10VG UPC # 612079188314
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • 10 Watt Mono Audio Amplifier

10 Watt Mono Audio Amplifier

The TSD-PA10VG is a cost effective mono amplifier for 4Ω and distributed constant voltage speaker systems. Applications such as house of worship cry rooms, restrooms, and foyers will benefit from this compact reliable amplifier. The TSD-PA10VG is also a good alternative for small projector systems as it can be used with as many as (8) 25/70/100V ceiling speakers (tapped at 1W each), plus the extremely small footprint allows for easy mounting. For sound masking applications the TSD-PA10VG has the capacity to drive up to 17 masking speakers tapped at .5W each on a 70.7V line.

Output is gain controlled from a potentiometer on the front panel with removable knob to facilitate installation of a tamper resistant cover (included).
  • 10W into 4Ω
  • 5W into 8Ω
  • 10W into 25V/70.7V/100V Loads
  • One (1) Balanced Input
  • Power Output: 10W @ 4Ω, 5W @ 8Ω, 10W @ 25V/70V/100V Loads
  • Line Input Level: 500mV (-6dBV) Balanced
  • Frequency Response: 40Hz - 20kHz (+/-3dB)
  • THD: .5% & 1kHz
  • Signal to Noise Ratio: 78dBV
  • 24VDC Power Requirements: 240mA
  • Dimensions
  • Height: 1.5" (3.81 cm)
  • Width: 4" (10.16 cm)
  • Depth: 2.75" (6.99 cm)
Write Your Own Review
You're reviewing:Atlas Sound TSD-PA10VG 10W Mono 4 Ohm/25V/70.7V/100V Power Amplifier
Your Rating