Description
Perforated Top Panels for 30" FMA Series Racks
Fully modular system offers frames with 19" panel width in five heights and three depths, as well as a large selection of accessories. (Refer to chart on page 2 for exact dimensions and model numbers.) Frames are 14-gauge CRS and are suitable for single and multiple bay configurations. Accessory components are ordered separately for application and cost flexibility.
Multi-formed and welded frame members provide superior strength, static and load bearing capability. Base is constructed of double-formed front and rear sections, MIG welded and reinforced with 11-gauge CRS corner caster gussets. Vertical columns interlock with frame top and base adding double material thickness for superior load bearing capability. Mounting rail channel support members are multi-formed and MIG welded for superior interlocking support. Panel mounting rails are fully adjustable front to rear. Rails are 11-gauge CRS, plated and tapped 10-32 (two pair supplied). Base includes four 3/8"-16 threaded sockets to accept leg levelers (Models LL-1, LL-2) and four 11- gauge CRS corner gussets that are punched to accept casters (Model CS-5PR, CS-HDPR). Order levelers/casters separately. Base also has provisions to be permanently secured to the floor.
Standard finish is a textured black #962. Other standard and special colors are available; consult factory for details.
Features:
- A Selection of top and side panels, doors, accent trims, and corner wedges for maximum configuration flexibility (ordered separately)
- Built to meet EIA-310-C standards
- Five height configurations with 251/2" depth, 30" depth and one model (77"H) with 36" depth
- Flexibility of modular configurations
- Other convenience, cooling, and electronic accessories are available
- Reinforced strength of front-to-rear channel members
- Structural integrity of MIG-welded, 14-gauge CRS frames with 19" wide panel openings
- Superior rigidity of multi-formed vertical column sections
- Textured in scratch-resistant black finish (#962)
- Two pair of plated 11-gauge mounting rails tapped 10-32
- UL Listed versions available by contacting factory
- Uninterrupted, seamless appearance of ground and smooth exterior weld seams
- Width: 22-1/8" (56.1975 cm)
- Depth: 30" (76.2 cm)
- Shipping Weight: 3.00 lbs (1.36 kgs)