Ashly nXe1502bd Network Power Amplifier with OPDante & OPDAC4 (2 x 150W)

This product has been discontinued.

We have discontinued this product permanently. Please browse our website by clicking the brand logo below. You can also search or browse our website by category above. If you have any questions, please feel free to contact us for more information.
PA SKU # 61880 MFR # NXE1502BD
  • Support Lifetime Tech Support!
  • Support 30 Day Returns!
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • 2 x 150 Watts @ 2 Ohms
    Dante Digital Interface
    Digital to Analog Converter
    Multi-Mode Operation
    Energy Star Compliant
    Euroblock Input/Output
    Detachable AC Connector
    CE, FCC, RoHS Certified

Network Multi-Mode Power Amplifier with OPDante and OPDAC4 Option Cards, Ethernet, 2 x 150 Watts @ 2 Ohms

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

Available in three amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP).

All NXE Models Include:

Class-D Switching Amplifier Technology.
NXE features a universal switch-mode power supply with Power Factor Correction (PFC) that operates from 70VAC to 270VAC.

Multi-Mode Operation.
Selectable Outputs allow you to choose the desired output mode on each channel. Set the DIP-switch configuration for Low Impedance
(2, 4, and 8 Ohm), or 25V, 70V, or 100V Constant Voltage and you're set to go.

Energy Efficiency.
NXP has power-saving Ashly EMS (Energy Management System) which provides an automatic sleep-mode drawing less than 1 Watt (defeatable).

Ethernet Control using Protea NE software.
Also, serial data control by Ashly programmable remotes or third party controllers, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, optional Dante, CobraNet, or AES3 digital audio capability (factory-installed).

Real-Time Clock with Event Scheduler.
Assign automa c execu on of selected functions and tasks. The event scheduler is programmed from software and stored in the amplifier.

Ashly Remote Control via iPad app.
Use our free Ashly Remote app available for custom design of secure wireless control over network.
  • Selectable 80Hz 2nd-order Hi-pass filter, limiter, and input gain per channel
    Remote DC level control per channel
    Extensive protection circuitry, continuously variable cooling fan
    Ethernet port for software control and monitoring of amplifier functions, with front panel COM activity LED
    Serial data port available for Ashly WR-5 programmable remote control (optional RS-232 converter INA-1 available for third party controllers)
    Instant Standby Mode, 40% reduction in idle power consumption, triggered by contact closure, software control, or event scheduler
    Preset recall via contact closure, software control, remote control, or event scheduler
    Programmable power-on delay
    Aux preamp line outputs for driving other amplifiers
    Fault condition logic outputs per channel
    Euroblock input connectors
    Euroblock loudspeaker connectors
    Detachable AC mains line-cord connector
    Safety/Compliance: cTUVus (pending), CE, FCC, RoHS
  • Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
    Damping Factor: >250 (8 Ohm load <1kHz)
    Input High Pass Filter: 80Hz 2nd order
    Distortion (SMPTE, typical): <0.5%
    Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)
    Channel Separation: -75dB (dB from full output, 1kHz)
    Signal-to-Noise (unweighted) 20Hz-20kHz, Gain@26dB:
    >99dB (all 150x models)
    >96dB (all 75x models)
    Frequency Response: 20Hz-20kHz, +/-0.05dB
    Balanced Input Connector: Euroblock 3.5mm
    Input Impedance: 10k Ohms
    Maximum Input Level: +21dBu
    Speaker Output Connector: Euroblock 7.62mm
    Control Network: RJ-45 connector, 100MB Ethernet
    AUX Output Connector: Balanced Euroblock 3.5mm
    AUX Output Maximum Level: +21dBu
    Remote Standby Contact Closure: Euroblock 3.5mm, close contact pin to ground (G) for standby mode
    Preset Recall Contact Closure: Euroblock 3.5mm, close contact to ground (G) for preset 1-4 recall
    Data Connection: Euroblock 3.5mm - Gnd, +18V, Data Out, Data In
    Fault Condition Logic Outputs: Euroblock 3.5mm - fault indicated by loss of 1Hz "heartbeat" pulse signal
    Remote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input
    Attenuators (per channel)
    Rear panel, software, offset link group, remote control. Fully off = Mute
    Amplifier Protection: Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
    Cooling: Continuously variable temperature controlled fan
    Environmental: 32°F-120°F, (0°C-49°C) non-condensing
    Power Requirements (@ 50/60Hz)
    Nominal Voltage Input: 120VAC - 240VAC
    Operating Range: 70VAC - 270VAC
    Minimum power-up: 70VAC
    Power Supply Type: SMPS with ac ve PFC (Power Factor Correction)
    AC Mains Line Cord Connector: Detachable Nema 5-15 for USA (May vary for export)
    Weights and Dimensions
    Unit Dimensions: 19"W x 1.75"H x 14.54"D (483mm x 45mm x 369mm)
    Shipping Dimensions: 25.2"W x 2.5"H x 19.5"D (641mm x 64mm x 495mm)
    Unit Weight: 1504/754 13.0lbs (5.4kg), 1502/752 11.9lbs (5.2kg)
    Shipping Weight: 1504/754 15.9lbs (7.2kg), 1502/752 14.8lbs (6.7kg)
    Front Panel LED Indicators
    POWER (white): Switch: On, Off, Standby ( ashing)
    PROTECT (red): On (fault condition or shut down), Off
    SLEEP (blue): On, amplifier is asleep from audio inactivity
    DISABLE (yellow): On, power switch & attenuators are disabled
    COM (green): On, for Ethernet data or Device ID
    Per Channel
    CLIP/MUTE (red): Clip @ 1dB below rated output / Mute
    SIGNAL (green): -18dB below rated output
    CURRENT (green): Brightness is proportional to output current
    TEMP (yellow): On dim at 90% max operating temperature, On full bright + protect at 100%
    BRIDGE (green): Per Channel Pair, On, Off
Write Your Own Review
You're reviewing:Ashly nXe1502bd Network Power Amplifier with OPDante & OPDAC4 (2 x 150W)
Your Rating
Performance Audio, LLC BBB Business Review
Verified by Comodo Secure

We Accept Visa Credit/Debit Cards
We Accept American Express Credit/Debit Cards
We Accept Mastercard Credit/Debit Cards
We Accept Discover Credit/Debit Cards
We Accept PayPal Payments and Financing
We Accept Bank/Wire Transfers
We Offer Financing
Copyright © 2019. All rights reserved. Follow us on Facebook Follow us on Twitter Follow us on Instagram Follow us on YouTube Follow us on Pinterest