ARX DI6SM 6-Channel Active Direct Box

PA SKU # ARX DI6SM MFR # DI6SM
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Six Channel Active Direct Box, Mic/Line Splitter & Line Mixer

Six Channel Active Direct Box, Mic/Line Splitter & Line Mixer

Interfaces Unlimited
MP3 players, Tape/cassette/DVD/CD decks, audio for video, drum machines, synthesizers, bass guitars, computers; at some stage all these need linking up to Balanced inputs, whether the application is Live sound, Studio or Broadcast.

A Pro Audio Toolbox
This unique and flexible audio toolbox allows Six independent unbalanced audio sources to easily and quietly interface with Balanced pro audio systems, either to individual channels or summed down to one Master output.

But that's not all
By pressing a single switch on the rear panel the DI-6SM will change modes from 6 Direct Boxes plus Mixer to being a 6 way Splitter (mic/line distribution amplifier). Now it will split an incoming microphone or line signal to 6 individual outputs or zones, with an XLR Loop Out to send the microphone output to a mixing desk as well. Switchable phantom power and Gain trim for the Mic input completes this new package

On the front panel, each channel has 2 IN/OUT jacks, a level control from infinity (off) through 0dB to +15dB gain, and a Clip indicator LED.

The Master section has a Master volume control and status LED's indicating whether the unit is in DI+Mixer or in Splitter mode. For your convenience there is also a balanced jack Mix output on the front panel, in parallel with the balanced XLR Mix output on the rear panel.

Balanced Outputs
On the rear, each channel has an XLR Balanced output, with associated Ground lift switch and status LED, to isolate the chassis and electronic grounds.

The Master section has a Balanced XLR output on the rear, and a Balanced Jack output on the front panel. In addition there is a Balanced XLR input with a switch to put the unit in either DI+Mixer or into Splitter mode. In Splitter mode there is a switch to toggle between Microphone and Line level input, as well as a Phantom Power switch and a Loop Output for a microphone signal to go to a Mixing desk as well

Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage change switch.
  • All new Updated version of our Unique Pro Audio problem solver
  • Six Direct boxes, Mic or Line Splitter and Line Mixer in one unit!
  • Balanced XLR Mic input with Gain control
  • Multiple modes: Six in, Six out; Six in, One out; One in, Six out
  • Individual Output Ground lift switches
  • Up to +15dB Gain available per channel
  • Balanced XLR Outputs; High Impedance Jack Ins and Outs
  • Flawless performance in any audio environment
  • Channels 1 - 6
  • High Z Input Impedance 2.2 Meg Ohm
  • Max Channel Gain 15dB
  • Clip LED Illuminates 1dB prior to clip
  • Direct Output Impedance 300 ohms Balanced
  • Max Input Level +20dB
  • Max Output Level +21dB
  • Signal to Noise -96dB (unity gain)
  • Frequency Response 20Hz to 20KHz, ±0.5dB
  • Distortion < 0.004%, 1KHz, +4dB
  • Output Connector XLR
  • Master Section
  • Output Impedance 300 Ohms Balanced
  • Max Output Level +21dB
  • Signal to Noise -90dB (unity gain)
  • Frequency Response 10Hz to 20KHz, ±0.5dB
  • Distortion < 0.004%, 1KHz, +4dB
  • Output Connector XLR
  • Splitter Section
  • Maximum Level +20dB
  • Mic Input Gain 20dB to 60dB
  • Mic Input Impedance 4K Ohm, Balanced
  • Line Input Impedance 20K Ohms, Balanced
  • Input Connector XLR
  • Frequency Response 10Hz-20KHz ±0.5dB
  • AC Power 100-120, 220-240 VAC, 8 VA
  • Size 19"W x 6"D x 13/4"H, 482 x 155 x 44mm
  • Weight 2.2 Kg (5 lbs)
  • Front Panel Controls
  • Hi Impedance (Hi-Z) insulated jack Input and Output connectors
  • Level control with up to +15dB of Gain available
  • Clip LED indicator
  • Marker panels for labeling DI assigns
  • Master Level controls
  • Status LED's for DI+Mixer or Splitter modes, Phantom power
  • Mix Output jack
  • Rear Panel
  • Balanced XLR Outputs
  • Individual Audio Ground Lift switches and status LED's
  • XLR and jack Master Outputs
  • XLR Input for splitter operation and XLR Loop Output
  • Splitter/DI + Mixer mode switch
  • Mic or Line level input switches
  • Phantom power switch
  • AC input connector, with voltage switch and fuse
Write Your Own Review
You're reviewing:ARX DI6SM 6-Channel Active Direct Box
Your Rating
Performance Audio, LLC BBB Business Review
Verified by Comodo Secure

We Accept Visa Credit/Debit Cards
We Accept American Express Credit/Debit Cards
We Accept Mastercard Credit/Debit Cards
We Accept Discover Credit/Debit Cards
We Accept PayPal Payments and Financing
We Accept Bank/Wire Transfers
We Offer Financing
Copyright © 2019. All rights reserved. Follow us on Facebook Follow us on Twitter Follow us on Instagram Follow us on YouTube Follow us on Pinterest