ART ProChannel II Channel Strip

PA SKU # ART PROCHANNELII MFR # PROCHANNELII UPC # 840402019312
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • Single Channel
  • Microphone Preamp
  • Compressor
  • Semi-Parametric EQ
  • Low-Cut Filter
  • Variable Input Impedance
  • Insert Points
  • Phantom Power
  • Gain Switch (+20dB) and Phase Reverse
  • Analog and LED Meters

Professional Tube Channel Strip

The ART Pro Channel II uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.

The ART Pro Channel II 's semi-parametric EQ offers wide tune-ability and can be patched before OR after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.
  • Fully Featured discrete class "A" Tube Microphone Preamplifier
  • 1/4" High Z input on the front panel
  • Selectable plate Voltage
  • Smooth musical sounding Optical Compressor
  • Separate Attack and Release controls
  • Auto/Manual Attack/Release switch
  • Parametric EQ
  • Large VU and LED meters
  • Multi section clip monitor LED
  • Selectable Source switches for VU signal monitoring of any section of the unit
  • Two insert loops
  • +4/-10 dB switch for optimal signal output levels
  • Toroidal power transformer for low noise
  • Input Impedance
  • Mic: 150 to 3.4K Ohms, variable
  • Instrument: 2.5M Ohms
  • Preamp Insert: .5K Ohms
  • Output Impedance
  • Balanced Output: 600 Ohms balanced
  • Unbalanced Output: 300 Ohms
  • Insert Outputs: 300 Ohms
  • Frequency Response
  • Analog In to Analog Out: 12Hz to 100KHz +0, -1dB
  • THD @ 1 KHz: <0.15% typical
  • THD @ to to 20 KHz: <0.033% typical
  • Equivalent Input Noise
  • Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
  • Instrument: -109 dBu, Input shortened, Max gain, "A" weighted
  • Maximum Input Level
  • Mic: +18dBu balanced
  • Instrument: +15 dBu
  • Maximum Gain
  • Mic: 70dB (XLR to balanced output)
  • Instrument: 64 dB (1/4" to balanced output
  • Maximum Output Level
  • Balanced: +24 dBu
  • Unbalanced: +20 dBu
  • Output Level At Meter 0 VU: +4 dBu/-10dBV
  • Preamp
  • Microphone Gain: 0 dB to +56 dB
  • Instrument Gain: +3 dB to +50 dB
  • Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave
  • Boost/Cut: +/- 12 dB on each band
  • Low Freq. Tuning: 40 / 120 Hz Selectable
  • MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
  • MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
  • High Freq. Tuning: 6 KHz / 18 KHz Selectable
  • Compressor / Limiter
  • Attack Time: 250 uSec. to 100 mSec.
  • Release Time: 00 mSec to 3 Sec.
  • Compression Ratio: 2: 1 to 30: 1
  • Dimensions (H x W x D - in): 3.5 x 19.0 x 9.2
  • Dimensions (cm): 8.9 x 48.3 x 23.3
  • Weight (lbs/kg): 11/5
  • Power Requirements: USA - 105 to 125 VAC/ 60 Hz
  • Export units configured for country of destination.
  • Note: 0 dBu = 0.775 VRMS, 0 dBV = 1 VRMS
Write Your Own Review
You're reviewing:ART ProChannel II Channel Strip
Your Rating