Adam Audio Sub10 MK2 10" 300 Watt Powered Studio Subwoofer

$1,499.99
PA SKU # ADM SUB10MKII MFR # Sub10 MK2 UPC # 888365206769
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • 10" Subwoofer (paper)
  • Amp. Power RMS / Music: 200 W / 300
  • Frequency response: 25 Hz - 150 Hz
  • Max. peak SPL at 1 m: ≥113 db
Woofer: 10" 10" 12" 21" 7"

10" 300 Watt Powered Studio Subwoofer in Bass Reflex Enclosure

The Sub10 MK2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.

A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.

The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).

  • Linear bass reproduction down to 25 Hz: Ideal addition to nearfield and midfield monitors
  • Maximum Peak sound pressure in 1 m ≥ 113 dB: Powerful, compression-free sound reproduction even at very high sound levels
  • High efficiency PWM amplifier: Low-distortion amplification at both low and high volume levels
  • Special 10" woofer with paper diaphragm: Unrestricted bass reproduction for low-fatigue operation even at high volumes
  • Easy manual or automatic (de-)activation: If desired, monitoring is possible without the low frequencies
  • According to downward working bass reflex tube with generous dimensions and corresponding rounding: Prevention of air turbulence noise
  • Upper cut-off frequency is selectable between 50 - 150 Hz: Allows optimal adaptation of the total system on the bass performance of the satellites
  • Connectable high-pass filter for the satellite outputs, which blocks signals below 85 Hz:
    • Dolby-Fair reproduction of film sound
    • Discharging the satellites from the low frequencies
  • SUBWOOFER

  • Number: 1
  • Basket Ø: 10" (260 mm)
  • Voice Coil Ø: 2" (50 mm)
  • Cone Material: Paper
  • BUILT-IN AMPLIFIERS

  • Subwoofer: 1
  • Type: PWM
  • Amp. Power RMS / Music: 200 W / 300 W
  • INPUT CONNECTORS

  • Analog: XLR / RCA
  • GENERAL DATA

  • Frequency Response: 25 Hz - 150 Hz
  • THD > 60 Hz: ≤1 %
  • Max. peak SPL at 1 m: ≥113 dB
  • Crossover Frequencies: 50 - 150 Hz
  • Input Impedance: 10 kOhm
  • Panel: Rear
  • Weight: 46.3 lb (21 kg)
  • Height x Width x Depth: 22" (560 mm) x 12" (300 mm) x 15.5" (400 mm)
  • Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
  • Delivery Contents: Power cord, manual
Write Your Own Review
You're reviewing:Adam Audio Sub10 MK2 10" 300 Watt Powered Studio Subwoofer
Your Rating