JK Audio THAT-1 Telephone Handset Audio Tap

PA SKU # JK THAT1 MFR # THAT1 UPC # 814170010345
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Connects to Many Analog and Digital Telephones, Lets You Record Your Conversation and Play It Back Into the Phone

Connects to Many Analog and Digital Telephones, Lets You Record Your Conversation and Play It Back Into the Phone

Connect THAT-1 between your telephone and handset for quick access to audio in and out of the telephone. The THAT-1 is used by radio stations to record and play sound bytes, and by computer and telephone companies to demonstrate their computer voice services using a powered speaker.

Simply unplug the handset coily cord form the base of your telephone and plug it directly into the THAT-1. Then, using the supplied cable, connect the THAT-1 back to the telephone. Now connect your audio equipment or powered speaker using the RCA jacks. The grey pushbutton selects which audio will be sent into the telephone (OUT = talking on the handset, IN = sending audio in through the RCA jack). The output RCA jack contains a nice mix of the audio from both sides of the conversation, as well as the tones being pressed on the keypad. The volume control adjusts the volume of the signal going to your powered speaker or tape recorder.

The THAT-1 will work with many different types of analog and digital PBX and ISDN telephones. The receive side of the THAT-1 (audio From Phone), will work on any telephone. To send audio into the telephone (To Phone), the telephone must have an electret type microphone in the handset. If your telephone has a round mouthpiece or if you intend to use theis product on many telephones, you should consider our model THAT-2, which is compatible with more telephone systems.

The THAT-1 does not work with cellular telephones or any telephone with a keypad in the handset.

  • Works with analog, digital, PBX, and ISDN telephones
  • RCA line in and out
  • Use the THAT-1 to get audio in and out of a sound card
  • Get presentation-quality audio using a powered speaker or PA system
  • No battery or AC adapter needed
  • Durable diecast aluminum construction

  • Line Inputs: RCA, 20 k ohms, 250 mV RMS (+12 dBm maximum)
  • Line Outputs: RCA, 2800 ohms, 100 mV RMS (-16 dBm nominal.)Handset Interface biased for electret handsets.
  • Size: 3.7 x 1.6 x 1.3 inch (9.4 x 4.1 x 3.3 cm)
  • Weight: 6.1 ounces
Write Your Own Review
You're reviewing:JK Audio THAT-1 Telephone Handset Audio Tap
Your Rating