PA SKU # WW PRESSPOWER2 MFR # PRESSPOWER 2 UPC # 692465004190
- Lifetime Tech Support
- Best Seller!
- Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
Active Press Box
The full-featured PRESSPOWER 2 is the successor to our original PRESSPOWER unit, the standard for press conferences worldwide.
Active Press Box
It features 2 mic/line inputs with individual gain controls and 16 transformer isolated outputs that are individually switchable for mic or line level operation. The PRESSPOWER 2 includes a 20-segment LED level meter, an internal test tone generator, a built-in headphone monitor amp with volume control, high-pass filters, and phantom power - all conveniently front-panel accessible.
The high-performance input stage provides clean audio even in high RF environments.
The unit can be powered by 115 / 230 VAC - 50 / 60 Hz, by (4) 9 V internal batteries or with an external DC supply (12 - 36 VDC) connected via rear terminals. This allows the unit to be powered by a car battery, cigarette lighter, camera pack battery, etc. In the event of an AC power failure or battery exhaustion, the unit will automatically switch to alternate power by selecting the strongest Voltage available.
Additional active mic/line outputs can be added with optional 16 channel PRESS2XP expander modules, giving you up to 48 total active outputs. Additional mic outputs can be achieved by adding passive PB Series Press Boxes to outputs set to line level.
The PRESSPOWER 2 is available without the padded case (PRESSPOWER 2 NC) and it mounts in a standard 4 space, 19" rackmount. Its case is also available separately (PRESS CASE, pictured above).
- Frequency Response: -.5dBm 20Hz to -2dBm 16kHz
- Input Impedance
- Mic: 1.5k Ohms
- Line: 200k Ohms
- Maximum Input Level
- Mic: -5dBm
- Line: +50dBm
- Output Impedance
- Mic: 150 Ohms
- Line: 150 Ohms
- Maximum Output Level
- Mic: -5 dBm into 2k Ohms
- Line: +23 dBm into 2k Ohms
- Total Harmonic Distortion: .075% at 1 kHz, mic @ unity gain
- Isolation Between Outputs
- Mic: Greater than 95 dBm
- Line: Greater than 60 dBm
- Power Draw AC mode: 31 W max.
- Power Draw DC mode
- Condition / Current (mA) / Batt Life (hr. - approx.)
- LED meter off, no headphones / 40 / 15
- LED meter in dot mode, no headphones / 73 / 9
- LED meter off, 30 Ohm headphones / 60 / 10
- LED meter in dot mode, 30 Ohm headphones / 94 / 5
- Size (inside case): 20" X 9.5" X 8.5"
- 4RU removed from case.
- Weight w/ case: 17 lb.
- Weight w/ out case: 12 lb.
- Shipping weight w/ case: 20 lb.
Write Your Own Review
More from Whirlwind