The Marshall 17" LCD RM Monitor with HD/3G-SDI Input Module fills the need for a basic rack mounted production or confidence monitor. The 1920 x 1080 LED backlit LCD panel supports both NTSC and PAL signal formats. The monitor includes an interchangeable loop-through HD/3G-SDI input module, which you can swap out for other optionally available input modules. The module allows you to connect a 3G-SDI source to your monitor, and provides an HD/3G-SDI loop-through output. The monitor maintains image brightness and color balance at viewing angles up to 140° x 130°, before severe viewing artifacts appear. The 250 nit brightness level is appropriate for use in location interiors and machine room viewing without a sun hood or visor, while the 600:1 contrast ratio displays an image useful for confidence viewing.
The monitor features multiple color temperature settings of D55, D65, and D93 and supports pixel-to-pixel display with pre-set gamma points, auto sensing of input signal, and false color. It is powered via 12 volt DC current, making it suitable for use on location or studio work, and features a two-pin twist lock connector. This monitor comes with rack mounting tabs installed, so you can easily integrate it into a rack or flight case.
This adjustable LED backlit panel features a 16:10 native aspect ratio, and supports both YUV and RGB color gamuts.
The monitor features a thin yet sturdy design, making it suitable for use on location production, build into a flight case, or as a rack mounted monitor.
The monitor supports false color, input status display, 1-to-1 pixel display.
- 17" 1920 x 1080 LED Backlit Panel
- Supports NTSC & PAL
- Interchangeable HD/3G-SDI Input Module
- Loop-Through HD/3G-SDI Output
- 140° x 130° Viewing Angle
- 250 Nit Brightness/600:1 Contrast Ratio
- Screen Markers, Pre-Set Color Temp.
- Rack Mountable
- Runs on 12VDC
- Signal System: NTSC, PAL
- Monitor Type: LCD Panel
- Screen Size: 17" Diagonal
- Resolution: 1920 x 1080
3G - Level A and Level B
3G - Level A and Level B
- Input/Output Connectors: Input: 1 x BNC
- Output: 1 x BNC
- Viewing Angle: 140 x 130°
- Brightness: 250 Nit
- Contrast Ratio: 600:1
- VESA Compatibility: 75 x 75mm
Operating: 32 to 104°F / 0 to 40°C
Storage: -4 to 120°F / -20 to 49°C
- Power Requirements:
Voltage: 12 VDC
Consumption: 3.5A @ 12 VDC (42 W)
Power switch: Yes
Connector: 2-pin twist lock
- Compliance: CE
- Dimensions (WxHxD): 18.9 x 10.45 x 1.4" / 48 x 26.5 x 3.6 cm
- Weight: 8.8 lb / 4 kg