The Marshall 17" LCD RM Monitor with Dual HD-SDI Input Module fills the need for a basic, rack-mounted, production or confidence monitor. The 1920 x 1080 LED backlit LCD panel supports both NTSC and PAL signal formats. The monitor includes an interchangeable dual-input HD-SDI module, which you can swap out for other optionally available input modules. The module allows you to connect two HD-SDI sources to your monitor, and it also features a switchable HD-SDI output that allows you to select which input to pass through. The monitor maintains image brightness and color balance at viewing angles up to 140° x 130°, before severe viewing artifacts appear. The 250 nit brightness level is appropriate for use in location interiors and machine room viewing without a sun hood or visor, while the 600:1 contrast ratio displays an image useful for confidence viewing.
The monitor features multiple color temperature settings of D55, D65, and D93 and supports pixel-to-pixel display with pre-set gamma points, auto sensing of input signal, and false color. It is powered via 12 volt DC current, making it suitable for use on location or studio work, and features a two-pin twist lock connector. This monitor comes with rack mounting tabs installed, so you can easily integrate it into a rack or flight case.
This adjustable LED backlit panel features a 16:10 native aspect ratio and supports both YUV and RGB color gamuts.
The monitor features a thin yet sturdy design, making it suitable for use on production location, build into a flight case, or as a rack-mounted monitor.
The monitor supports false color, input status display, 1-to-1 pixel display.
- 17" 1920 x 1080 LED Backlit Panel
- Supports NTSC & PAL
- Interchangeable Dual HD-SDI Input Module
- Input Module Includes HD-SDI Output
- 140° x 130° Viewing Angle
- 250 Nit Brightness/600:1 Contrast Ratio
- Screen Markers, Pre-Set Color Temp.
- Runs on 12VDC
- Signal System: NTSC, PAL
- Monitor Type: LCD Panel
- Screen Size: 17" Diagonal
- Resolution: 1920 x 1080
- Input Connectors: 2 x HD-SDI
- Output Connectors: 1 x HD-SDI (Switchable)
- Viewing Angle: 140 x 130°
- Brightness: 250 nit
- Contrast Ratio: 600:1
- VESA Compatibility: 75 x 75 mm
Operating: 32 to 104°F / 0 to 40°C
Storage: -4 to 120°F / -20 to 49°C
- Power Requirements:
Voltage: 12 VDC
Consumption: 3.5A @ 12 VDC (42 W)
Power switch: Yes
Connector: 2-pin twist lock
- Compliance: CE
- Dimensions (WxHxD): 18.9 x 10.45 x 1.4" / 48 x 26.5 x 3.6 cm
- Weight: 8.8 lb / 4 kg