Tascam DR-100mkII | Performance Audio

The rugged TASCAM DR-100mkII offers high-end recording features to musicians and engineers who demand more from their portable recorder. It features four built-in microphones, two cardioid and two omnidirectional, for great sounding recordings. A pair of XLR microphone inputs with phantom power welcomes pro-grade condenser microphones, and line in and out connectors are also provided. The markII version adds balanced line ins, S/PDIF digital inputs, locking connectors and more.

Tascam DR-100mkII Features:

+4dBu (maximum +24dBu) line input available via XLR jack
XLR jack with a locking latch for professional use
Better quality uni-directional and omni-directional microphones than the original DR-100
Accepts digital input signal from an external digital device via remote jack
Improved Mic pre amp with higher gain and lower noise
Up to 96kHz/24-bit WAV recording
32 to 320kbps MP3 recording
XLR or RCA 1/8" line input
S/PDIF digital power
Wired/wireless remote control included (RC-10)
Limiter and low cut filter
Back panel dedicated switches
Rugged aluminum casing
VSA changes playback speed from -50% to +16%
Records to SD or SD-HC card (2GB card included)
Mini USB 2.0 jack and cable
Large thumbwheel individual gain control
Built-in speaker
Tripod Mount
Included Li-ion battery, windscreen and carrying case

Tascam DR-100mkII Specifications:

Recording Media: SD card (64MB～2GB), SDHC card (4GB～32GB)
File System: FAT16/32
File Format: WAV、MP3
Recording/Playback Format
WAV: 44.1/48/96 (HS mode) kHz, 16/24-bit
MP3: 44.1/48kHz, 32/64/96/192/256/320kbps
Number of Channels: 2 channels (stereo)
Playback Speed Control (VSA): -50% - +16% (1% step)
Analog Input:
MIC/LINE 1 IN (XLR)
(Phantom Power Compatible): XLR-3-31 (1：GND, 2：HOT, 3：COLD)
MIC (Switch is set to MIC):
Input Impendance: 2.1kΩ
Nominal Input Level: −14dBu
Maximum Input Level: +2dBu
LINE 1 (Switch is set to LINE ):
Input Impendance: 2.5kΩ
Nominal Input Level: +4dBu
Maximum Input Level: +24dBu
LINE 2 IN:
Connetor: 1/8" (3.5mm)stereo mini jack
Input Impedance: 22 kΩ or more
Nominal Input Level: −10dBV
Maximum Input Level: +6dBV
Analog Output:
LINE OUT
(XLR LINE IN):
Connector
1/8" (3.5mm)stereo mini jack
Output Impendance
200 kΩ
Nominal Output Level: －14dBV
Maximum Output Level: ＋6dBV
Headphone Output: 1/8" (3.5mm)stereo mini jack
Connector: 25mW+25mW (With 32Ω headphone connection)
Maximum Output: 25mW+25mW (With 32Ω headphone connection)
Built-in Speaker: 0.4W (mono)
Digital Input: 3/32" (2.5 mm) TRS jack (using the conversion cable made for this unit)
Format: IEC60958-3 (S/PDIF)
USB: Mini-B type
Format: USB2.0 HIGH SPEED mass storage class
REMOTE: 3/32" (2.5 mm) TRS jack
Power Supply: Lithium-ion rechargeable battery made for this unit (TASCAM BP-L2)
Two AA batteries (Alkaline or Ni-MH batteries)
AC adaptor (TASCAM PS-P520, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)
Power Consumption: 4W (maximum)
Battery Life
(Continuous Operation):
Lithium ion batteries (BP-L2):
Built-in mics (UNI／OMNI)
About 5 hours (Recording WAV, 44.1kHz, 16 bit)
Ni-MH batteries
(eneloop):
Built-in mics (UNI／OMNI)
About 4 hours (Recording WAV, 44.1kHz, 16 bit)
Dimensions
(w x h x d):
3.15 x 6.024 x 1.378 inch / 80 x 153 x 35 mm
Weight: 10.23 oz. / 290g (without batteries)
Operating Temperature range: 32-104(0)F / 0-40℃
Included Accessories: 2GB SD card, Mini USB cable, lithium ion batteries (BP-L2), wireless/wired remote (RC-10), carrying case and windscreen
Audio Performance
Frequency response: 20-20kHz ＋1/－3dB (EXT IN→LINEOUT、Fs44.1kHz、JEITA)
20-22kHz ＋1/－3dB (EXT IN→LINEOUT、Fs48kHz、JEITA)
20-40kHz ＋1/－3dB (EXT IN→LINEOUT、Fs96kHz、JEITA)
Distortion: Less than 0.01% (XLR LINE 1 IN→LINE OUT, Fs44.1kHz, +24dBu input, JEITA)
S/N Ratio: 92dB or more (XLR LINE 1 IN→LINE OUT, Fs44.1kHz, +24dBu input, JEITA)
Computer Requirements
Windows
OS: Windows XP
Windows Vista
Windows 7
CPU/Clock: Pentium 300MHz or better
Memory: 128MB or more
USB Port: USB2.0 recommended
Macintosh
OS: Mac OS X 10.2 or later
CPU/Clock: Power PC, iMac, G3, G4, G5 266MHz or more
memory: 64MB or more
USB Port: USB2.0 recommended