Sennheiser EW122PG3-A | Performance Audio

The ME4 clip-on cardioid microphone compliments this ENG set by blocking out extraneous background noise due to its high-directivity. The bodypack transmitter and portable adaptive diversity receiver are equipped with charging contacts built-in to the housing for use with Sennheiser's optional rechargeable batteries. Reception stays strong as the receiver is upgraded to utilize its line cable as a second antenna for adaptive-diversity operation.

Sennheiser EW122PG3-A Includes:

EK100G3 diversity receiver
SK100G3 bodypack transmitter
ME4 clip-on microphone (cardioid)
CL1 jack cable
CL100 XLR cable
CA2 camera adapter
4 AA batteries
Operating instructions

Sennheiser EW122PG3-A Features:

Sturdy metal housing (transmitter and receiver)
42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 12 compatible frequencies
Adaptive-diversity reception for high reception quality
Pilot tone squelch for eliminating RF interference when transmitter is turned off
Automatic frequency scan feature searches for available frequencies
Enhanced AF frequency range
Increased range for audio sensitivity
Wireless synchronization of transmitters via infrared interface
User-friendly menu operation with more control options
Illuminated graphic display (transmitter and receiver)
Auto-Lock function avoids accidental changing of settings
HDX compander for crystal-clear sound
Transmitter and receiver feature battery indicatation in 4 steps
Programmable Mute function
Contacts for recharging BA2015 accupack directly in the transmitter or receiver
Wide range of accessories adapts the system to any requirement

Sennheiser EW122PG3-A Specifications:

Transmission/receiving frequencies: 1,680
Presets: 12
Switching bandwidth: 42 MHz
Peak deviation: +/- 48 kHz
Compander: HDX
Frequency response (microphone): 80 - 18,000 Hz
Signal-to-noise-ratio: > 110 dB(A)
Total harmonic distortion (THD): < 0.9%
In compliance with: ETS 300422 , ETS 300445 , CE , FCC
XLR connector: 3.5 mm jack
Audio output level (unbalanced): +10 dBu max.
Dimensions (receiver): 3.2 x 2.5 x .9 in. (82 x 64 x 24 mm)
Weight (receiver): Approx. 5.6 oz. (160 g)
RF output power: 30 mW
Operating time (transmitter): typ. 8 h mic
Input voltage range: 1.8V line, 3V eff. line
Dimensions (transmitter): 3.2 x 2.5 x .9 in. (82 x 64 x 24 mm)
Weight (transmitter): Approx. 5.6 oz. (160 g)
Transducer / microphone type: elektret
AF sensitivity: 40 mV/Pa
Sound pressure level (SPL): 120 dB(SPL) max