Sennheiser EW100ENGG3-G | Performance Audio

This ENG set offers a great amount of flexibility for portable recording indoors or outdoors. Its SKP 100 G3 plug-on transmitter transforms XLR equipped devices (such as microphones and mixing consoles) into wireless devices by simply plugging the unit in. The bodypack transmitter, as well as the plug on, can by synced up to the receiver with the simple push of a button. A very small high-quality directional clip-on microphone completes this set.

Sennheiser EW100ENGG3-G Includes:

1 EK100G3 diversity receiver
1 SK100G3 bodypack transmitter
1 ME2 clip-on microphone (omnidirectional pick-up pattern)
1 SKP100G3 plug-on transmitter
1 CL1 jack cable
1 CL100 XLR cable
1 CA2 camera adaptor
6 AA batteries
Operating instructions
1 Pelican 1200 protector case
24 Duracell ProCell AA batteries

Sennheiser EW100ENGG3-G Features:

Sturdy metal housing (transmitter and receiver)
42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 12 compatible frequencies
Adaptive-diversity reception for high reception quality
Pilot tone squelch for eliminating RF interference when transmitter is turned off
Automatic frequency scan feature searches for available frequencies
Enhanced AF frequency range
Increased range for audio sensitivity
Wireless synchronization of transmitters via infrared interface
User-friendly menu operation with more control options
Illuminated graphic display (transmitter and receiver)
Auto-Lock function avoids accidental changing of settings
HDX compander for crystal-clear sound
Transmitter and receiver feature battery indicatation in 4 steps
Programmable Mute function
Contacts for recharging BA2015 accupack directly in SK100G3 or EK100G3
Wide range of accessories adapts the system to any requirement
Pelican 1200 Protector Case
Watertight, crushproof, and dust proof
Easy open Double Throw latches
Open cell core with solid wall design - strong, light weight
O-ring seal
Automatic Pressure Equalization Valve
Stainless Steel hardware
Pick 'N' Pluck with convoluted lid foam
Unconditional Lifetime Guarantee of Excellence

Sennheiser EW100ENGG3-G Specifications:

Transmission/receiving frequencies: 1680
Presets: 12
Switching bandwidth: 42 MHz
Peak deviation: +/- 48 kHz
Compander: HDX
Frequency response (microphone): 80.....18000 Hz
Signal-to-noise ratio: > 110 dB(A)
THD, total harmonic distortion:
In compliance with: ETS 300422 , ETS 300445 , CE , FCC
Audio-XLR connector: 3,5 mm jack
Audio output level (unbalanced): +10 dBu max
Dimensions (Receiver): 82 x 64 x 24 mm
Weight (Receiver): ~ 160 g
RF output power: 30 mW
Operating time (transmitter): > 8 h
Input voltage range: Mic/Line: 1,8V/3,0V (SK100G3), Mic: 1,2V (SKP100G3)
Dimensions (Transmitter): 82 x 64 x 24 mm (SK100G3), 105x43x43mm (SKP100G3)
Weight (Transmitter): ~ 160 g (SK100G3), 195g (SKP100G3)
Transducer; Microphone type: elektret
AF sensitivity: 20 mV/Pa
Sound pressure level (SPL): 130 dB(SPL) max.
Pick-up pattern: omni-directional
Pelican 1200 Protector Case
Exterior Dimensions (L x W x D):10.62" x 9.68" x 4.87"(27 x 24.6 x 12.4 cm)
Interior Dimensions (L x W x D):9.25" x 7.12" x 4.12"(23.5 x 18.1 x 10.5 cm)
Lid Depth: 1.18" (3 cm)
Bottom Depth: 2.93" (7.4 cm)
Total Depth: 4.11" (10.4 cm)
Weight w/Foam: 2.87 lbs. (1.3 kg)
Weight w/o Foam: 2.65 lbs. (1.2 kg)
Buoyancy Max.: 12.02 lbs. (5.45 kg)
Range Temperature: -10 / 210 F (-23 / 99 C)