Radio Design Labs - RDL RM-MP12A Radio Design Labs - RDL RM-MP12A

Product Information
Overview Each RM-MP12 input may be individually calibrated for unbalanced consumer, balanced professional, 8 Ohm speaker line or constant voltage speaker lines. There is a variable intensity LED on the front panel to show audio presence for each input. If the RM-MP12 is set to the interlocking operating mode, front-panel pushbuttons select one of the twelve inputs to feed the calibrated meter, front-panel speaker (or external speaker if connected) and headphone jack. In the mixing mode, the buttons allow the use to mix multiple sources. The front-panel volume knob controls the audio level of the front-panel headphone jack, front-panel speaker, external speaker output and variable line level (+4 dBu) rear-panel output. A separate fixed line-level output is provided.
  • Twelve Individually Selectable Audio Inputs
  • Selectable Operating MODE Provides Interlocking Source Selection or Mixing Multiple Sources
  • LED Above Each Button to Show Selected Source
  • VU Ballistic LED Above the Button for Each Input
  • Calibrated Front-Panel Meter Display
  • Front-Panel Speaker and Headphone Jack
  • Front-Panel VCA Control for Headphone and Speaker Output Levels
  • Internal 4.5 W RMS Power Amplifier and Speaker
  • Audio Inputs and Outputs on Detachable Terminal Blocks
  • Inputs (12): +4 dBu, 25 V, 70.7 V, 100 V (set by rear-panel switches)
  • Input Level: -11 dBu to +9 dBu (+4 dBu input) 25 V, 70.7 V, 100 V (calibrated with gain trim set fully counter-clockwise)
  • Headroom: > 18 dB (above calibrated input level)
  • Gain: 0 dB to 20 dB (Adjustable for speaker-level input, 25-turn trim potentiometer)
  • -5 dB to 15 dB (+4 dBu input)
  • Frequency Response: 10 Hz to 20 kHz (+/-0.25 dB)
  • THD+N: < 0.010% (20 Hz to 20 kHz)
  • Intermodulation Distortion: < 0.025% (20 Hz to 20 kHz)
  • Channel to Channel Crosstalk: < -80dB (10Hz to 20 kHz)
  • Residual Noise: < -80 dB (Channel ON; referred to +4 dBu)
  • OFF Attenuation: > 80 dB (10 Hz to 20 kHz)
  • Indicators per Channel (2): Red channel active LED above button; Variable intensity audio level LED for each input (minimum intensity at -15 dB, maximum intensity at 0 dB)
  • CMRR: > 75 dB (50 to 120 Hz)
  • Outputs (4): 150 Ohms, +4 dBu fixed level (balanced or unbalanced via plug-in terminal block)
  • 150 Ohms, +4 dBu variable level (balanced, controlled by front-panel volume knob)
  • 4.5 W RMS external speaker connection (use of external speaker disconnects internal speaker) 100 mW 1/4-inch stereo headphone jack
  • Power Requirement: GROUND-REFERENCED, 24 Vdc @ 700 mA
  • Mounting: Standard 19" Rack-mount; 1 Rack Unit (RU)
  • Dimensions:
  • Height: 1.75 in 4.40 cm
  • Depth: 5.35 in 13.60 cm
  • Ambient Operating Environment: 0 C to 55 C
comments powered by Disqus
Brand Radio Design Labs - RDL
Model RM-MP12A
Part Number RM-MP12A
UPC 813721016317
Product Category Audio Routing & Distribution
Unit of Measure EACH
Shipping Weight 4.55 lbs.
Manufacturer Link
Radio Design Labs - RDL Performance Audio is an authorized Radio Design Labs - RDL dealer.
RDL is the world's premier manufacturer of high-quality audio, video and control modules. The concept of application-specific modules was first introduced by RDL more than twenty years ago... a concept promoting unsurpassed value and performance. A concept which has attained widespread popularity and is a proven success in many thousands of facilities around the world. As the inventor of application-specific modules, RDL continues to lead the industry with solutions to specific problems as well as building blocks of quality system designs.
Previous Radio Design Labs - RDL product
<< Radio Design Labs - RDL RM-FP2
Next Radio Design Labs - RDL product
Radio Design Labs - RDL RMS-4 >>
Brands Radio Design Labs - RDL Audio - Program Monitoring RM-MP12A Pin This on Pinterest