Holiday Closing: Performance Audio will be closed Thursday, July 24th for a Utah state holiday. Our online store will remain open during this time. Thank you!
Radio Design Labs - RDL RCX-A2 Radio Design Labs - RDL RCX-A2


Product Information
Overview The RCX-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source. It may be connected to the +4 dBu line level output of any RDL product, even if that output is simultaneously feeding other equipment. The RCX-A2 circuit design provides a high degree of audio isolation if a user accidentally feeds a consumer-level source into the RCX-A2. The attenuation of such reverse signals is sufficient for most installations. Active RDL modules are available for complete isolation if required. The RCX-A2 output jacks are transformer isolated from the balanced line input, and the input shield is separated from the case ground to reduce the possibility of induced hum. The RCX-A2 is not intended as an audio input panel.

The RCX-A2 fits directly into back boxes, available from RDL, to fit cabinets or US or international walls (RDL WB-1U). It may also be mounted directly into cabinets or most standard US single gang electrical boxes.
Features
  • Wall Mounted Consumer Level Outputs
  • Single or Dual Outputs from Mono Source
  • Gold Plated Phono Jack Outputs
  • Transformer Isolation on the Line Outputs
  • Unbalanced Audio Outputs from a Balanced Line Input
  • High Attenuation of Reverse Signals
  • RDL ULTRASTYLE design with all steel panel and rear enclosure
Specifications
  • Input Level: +4 dBu, nominal
  • Input Connector: Full size barrier block
  • Input Impedance: 10 kΩ balanced bridging, monaural
  • Output Connectors (2): Phono jacks with gold contacts
  • Input Connections (4): CASE GROUND, SHIELD, + , -
  • Frequency Response: 50 Hz to 20 kHz (+/- 1 dB)
  • Attenuated Signal − Reverse Path: < -50 dB (at 150 Ω balanced source output, +4 dBu reference, -10 dBV signal injected into output jack)
  • Power Requirement: Passive
  • Overall Dimensions:
  • Height: 4.88 in. 12.40 cm
  • Width: 3.39 in. 8.61 cm
  • Depth: 1.29 in. 3.28 cm
  • Backbox Mounting Req.:
  • Height: 2.73 in. 6.93 cm
  • Width: 1.80 in. 4.57 cm
  • Depth: 1.50 in. 3.81 cm
  • Ambient Operating Environment: 0 C to 55 C
Documents
Brand Radio Design Labs - RDL
Model RCX-A2
Part Number RCX-A2
Product Category Wall Plates, RCA Panel Mount Jacks
Unit of Measure EACH
Weight 0.85 lbs.
Radio Design Labs - RDL Performance Audio is an authorized Radio Design Labs - RDL dealer.
RDL is the world's premier manufacturer of high-quality audio, video and control modules. The concept of application-specific modules was first introduced by RDL more than twenty years ago... a concept promoting unsurpassed value and performance. A concept which has attained widespread popularity and is a proven success in many thousands of facilities around the world. As the inventor of application-specific modules, RDL continues to lead the industry with solutions to specific problems as well as building blocks of quality system designs.
Previous Radio Design Labs - RDL product
<< Radio Design Labs - RDL RCX-5CM
Next Radio Design Labs - RDL product
Radio Design Labs - RDL RCX-A2N >>
Brands Radio Design Labs - RDL Remote Connector Plates RCX-A2 Pin This on Pinterest