Radio Design Labs - RDL FP-BUC2 Radio Design Labs - RDL FP-BUC2

Purchased Together with This Item
Hosa YPP-106
Hosa YPP-106
Radio Design Labs - RDL ST-LCR1H
Radio Design Labs - RDL ST-LCR1H
Radio Design Labs - RDL FP-RRAH
Radio Design Labs - RDL FP-RRAH
Radio Design Labs - RDL FP-UBC2
Radio Design Labs - RDL FP-UBC2
Radio Design Labs - RDL PS-24AS
Radio Design Labs - RDL PS-24AS
Radio Design Labs - RDL FP-UBC6
Radio Design Labs - RDL FP-UBC6
Radio Design Labs - RDL FP-RRA
Radio Design Labs - RDL FP-RRA

Product Information
Overview The FP-BUC2 is the ideal choice for connectorized conversion from balanced to unbalanced audio. This module features two identical active (transformerless) channels. Gold contact XLR jacks are utilized for the balanced input channels. Each output is unbalanced, connected through a gold-plated phono jack. A level trim potentiometer is provided for each channel.

The FP-BUC2 circuitry features low-noise, low-distortion and excellent headroom and crosstalk performance and the superior audio clarity for which RDL products are known. The FP-BUC2's low profile and compact size permit mounting in confined spaces and in various locations in equipment racks.
Features
  • Stereo Balanced to Unbalanced Audio Conversion
  • Connectorized Audio Converter
  • Output Level Trim
  • Low-Noise and Low-Distortion Conversion
  • Cabinet, Shelf or Rack Mounting
  • Convenience of RDL FLAT-PAKs
Specifications
  • Amps per FP-BUC2: 2 identical circuits (stereo or dual mono operation)
  • Gain: +/- 6 dB (adjustable relative to −10 dBV output for +4 dBu input); (separate controls for each channel)
  • Input Level: −2 dBu to +10 dBu (for -10 dBV output)
  • Input Impedance: 20 kΩ
  • Input Configuration: Balanced bridging
  • Output Level: -10 dBV
  • Output Impedance: 75 Ω (drives 600 Ω or 10 kΩ unbalanced lines)
  • Output Configuration: Unbalanced
  • Frequency Response: 10 Hz to 40 kHz (+/- 0.1 dB)
  • THD+N: < 0.005% (10 Hz to 40 kHz)
  • IMD: < 0.005%
  • Headroom: > 18 dB (at rated output level of -10 dBV)
  • Noise: < -90 dB (referred to -10 dBV, 20 Hz to 20 kHz)
  • Typ. −95 dB (rel. −10 dBV, "A-Weighted")
  • CMRR: > 50 dB (20 Hz to 5 kHz)
  • Crosstalk: Better than -90 dB (20 Hz to 20 kHz)
  • Power Requirement: GROUND-REFERENCED, 24 Vdc @ 50 mA
  • Dimensions:
  • Height: 1.29 in. 3.28 cm
  • Width: 3.25 in. 8.26 cm
  • Length: 4.07 in. 10.34 cm
  • Ambient Operating Environment: 0 C to 55 C
Documents
Brand Radio Design Labs - RDL
Model FP-BUC2
Part Number FP-BUC2
Product Category Format Converters, Cable Adapters & Converters
Unit of Measure EACH
Weight 0.70 lbs.
Manufacturer Link http://www.rdlnet.com/product.php?page=43
Radio Design Labs - RDL Performance Audio is an authorized Radio Design Labs - RDL dealer.
RDL is the world's premier manufacturer of high-quality audio, video and control modules. The concept of application-specific modules was first introduced by RDL more than twenty years ago... a concept promoting unsurpassed value and performance. A concept which has attained widespread popularity and is a proven success in many thousands of facilities around the world. As the inventor of application-specific modules, RDL continues to lead the industry with solutions to specific problems as well as building blocks of quality system designs.
Previous Radio Design Labs - RDL product
<< Radio Design Labs - RDL FP-AVDA4
Next Radio Design Labs - RDL product
Radio Design Labs - RDL FP-CH8 >>
Brands Radio Design Labs - RDL Audio - Line Amplifiers / Interface FP-BUC2 Pin This on Pinterest