Radio Design Labs - RDL EZ-MPA1X
Microphone Preamplifier - Stereo Output with Compressors - Includes Worldwide Power Supply (Specify Plug)
Based on 0 reviews.
UPC # 813721010421
Retail Price $191.10
Performance Audio Savings -$52.16
Free Shipping (Over $49) $0.00

shadow
Your Price $138.94

Add to Wishlist | Request a Quote
The EZ-MPA1 is a microphone preamplifier with front-panel volume control and audio level metering. A front-panel switch engages an audio compressor to control overloads and clipping during high level audio bursts or peaks from the microphone. Dynamic or condenser microphones are both supported with rear-panel switchable phantom voltage. The preamplified mic signal feeds both channels of the line output on RCA or MINI jacks. LED VU metering facilitates easy level adjustment. The EZ-MPA1 is ideal to add microphone inputs to mixers and amplifiers with line inputs. It is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, studios and commercial sound systems.

Model numbers:
EZ-MPA1 includes power supply with North American plug
EZ-MPA1X includes worldwide power supply (specify plug)
Balanced Microphone Input on Rear-Panel XLRSwitch-Selectable Phantom on Rear PanelUnbalanced Output on MINI or RCA Rear-Panel JacksPreamp Feeds Left and Right Output ChannelsFront-Panel Compressor Enable/Disable SwitchAudio Compressor Controls OverloadsFront-Panel LEVEL ControlDual-LED VU MeterOptimized for Dynamic or Condenser MicsHeadroom Accomodates High Input LevelsHeadroom Increases with Lower Gain SettingsCompressor Limits Clipping Over Wide Dynamic Range
Input: 1.2 kΩ balanced on XLR jack, mic-level, -11 dBu max.Level control: Off to 50 dB gainOutputs (2): -10 dBV nominal on RCA jacks or Mini jack, +16 dBV max. without compression, -4 dBV max. with 20 dB compressionFrequency Response: 80 Hz to 40 kHz (+/-1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter)THD+N: < 0.1% (35 Hz to 20 kHz, -50 dBu input)Compression: 20 dB range, switch-selectableCMRR: > 55 dB (20 to 20 kHz)Metering: Dual-LED VU Meter, calibrated to -10 dBV outputPhantom: Switch-selectable 24 V (IEC 1938: 1996-12)Noise: < -65 dB (below -10 dBV output, -50 dBu input)24 Vdc power supply current: 55 mA (idle), 80 mA (max.), 100 mA (max. with phantom)Case dimensions: 5.75" (14.6 cm)W x 3" (7.6 cm)DMounting size: 1/3 rack width
Based on 0 reviews.
Write a review of the Radio Design Labs - RDL EZ-MPA1X
Review Guidelines

✓ Explain why you like or dislike the product, focusing your comments on the product's features & functionality and your own experience using the product.

✓ Avoid single-word reviews, bad language, contact information (email addresses, phone numbers, etc.), URLs, time-sensitive material or alternative ordering information.

✓ Avoid comments about non-product related issues such as service and support, resellers, shipping, sales policies, or topics not directly related to the product's features or functionality.

✓ Your review should be approved within a few business days.

✓ We reserve the right not to post any review that does not meet these guidelines.

 Title of the review(please limit to 10 words)

Rate this product(your overall rating of this product)

Body of the review

Your Name(nicknames are fine)

Your Email(will not be displayed with the review)

Brands Radio Design Labs - RDL EZ-MPA1X Pin This on Pinterest