JBL EON210P | Performance Audio

The EON210P consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100 H by 60 V waveguide driven by a 300 watt Crown Class-D power amplifier and integrated mixer.

JBL EON210P Features:

300 watt High-Performance Powered Speaker System
Ergonomic soft touch top grip for easy handling
10" low-frequency driver with neodymium magnet for low-distortion and light weight
1" throat diameter next generation JBL neodymium compression driver
Efficient Crown Class-D amplifier technology
100 H x 60 V asymmetrical wave guide for uniform audience coverage
8 chanel powered mixer with intuitive interface
On board digital multi-effects
Integrated 36 mm pole mount socket with stabilizing securing screw
Highly designed composite enclosures for durability, lightweight, and acoustic performance

JBL EON210P Specifications:

System Power Rating: 300 Watts (2 X 150 Stereo)
Maximum SPL Output: 124 dB peak system output (pink noise)
Net Weight of System: 33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod)
System Type: Powered mixer with 2 two-way bass-reflex enclosures
Frequency Range (-10 dB): 60 Hz - 20 kHz
Frequency Response (+/-3 dB): 75 Hz - 19 kHz
AC input: 120 - 240 V 50/60 Hz, voltage selector switch sets operational range
Amplifier Design: Crown Class D
Output Connector: 2 X 1/4" TS (unbalanced) amplifier outputs
Input Connectors: 8 inputs (4 Mono Mic/Line, 2 X Stereo)
Channels: 1-4 are XLR / 1/4" jack combo connectors, XLR is a mic level input, 1/4" is a line level input. 5-6, one pair of 1/4" balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
Input Impedance: Ch 1-4 Combo: XLR 3 K Ohms Balanced
Ch 1-4 Combo: TRS 20 K Ohms Balanced
Ch 5-6: TRS 25 K Ohms Balanced
Ch 5-6: RCA 12 K Ohms Unbalanced
Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
Phantom Power: 30 V
Output Connectors: Monitor outputs: one pair of 1/4" balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
Headphone output: one 3.5 mm stereo jack
Signal Indicators
Main Output LED Ladder: Limit: Red LED indicates limiter active condition
Signal: Green LED indicates signal present
Signal Indicators: Ch 1-4: Peak LED: Green = signal present, Red = input overload
EQ: Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
System Limiter: On Board DSP Limiting and Tuning
LF Driver: 1 x JBL 328 H 250 mm (10 in) woofer
HF Driver: 1 x JBL 2414H-1 37.5 mm (1.5" ) annular polymer diaphragm, neodymium
compression driver
Coverage Pattern: 100(0) x 60(0) nominal
Crossover Frequency: 2 kHz
Crossover Type: Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
Enclosure: Polypropylene
Suspension/ Mounting: 36 mm pole socket with stabilizing screw
Handles: One on top
Grille: Powder coated perforated steel
Shipping Package (HxWxD): 21.5" x 26" x 13.75" (546 mm x 660 mm x 349 mm)