Earthworks M23mp Earthworks M23mp Earthworks M23mp

Purchased Together with This Item
Earthworks MC2
Earthworks MC2

Product Information
Overview The M Series has become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. They are remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise.

Models
M23 23kHz omnidirectional measurement microphone
M23mp 23kHz omnidirectional measurement microphone - matched pair
Features
  • 23kHz flat frequency response
  • Cost effective measurement microphone
  • Improved version of the SMAARTMIC previously offered by EAW
  • Ideally suited for acoustical measurements sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
  • Omnidirectional polar pattern
  • Flat frequency response, fast impulse response and exceptional polar characteristics
  • Used by SMAART, MLSSA, Spectrafoo, TEF and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
  • Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
  • Requires 48V Phantom Power
  • Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
  • Electronic Calibration File available
  • Operating Temp Range: -10 deg C to +40 deg C ( 14 deg. F to 104 deg. F)
  • Storage Temp Range: -20 deg C to +50 deg C ( -4 deg. F to 122 deg. F)
Specifications
  • Frequency Response: 9Hz to 23kHz +/-1/-3dB
  • Polar Pattern: Omnidirectional
  • Sensitivity: 30mV/Pa (-30.5dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 142dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100Ω, balanced (50Ω ea. pin 2 & 3)
  • Min Output Load: 600Ω between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Dimensions L x D: 165mm x 22mm (6.5 x .860 inches)
  • Weight: .35 lb. (160g)
Applications
  • Foley Recording
  • Measurement
  • Room/Ambient
Documents
Brand Earthworks
Model M23mp
Part Number M23MP
UPC 827517000565
Product Category Test & Measurement Microphones
Unit of Measure EACH
Weight 4.00 lbs.
Earthworks Performance Audio is an authorized Earthworks dealer.
Earthworks is a New Hampshire, U.S.A. based company that is dedicated to quality and sonic excellence. Each Earthworks product is made with great care, meticulous attention to detail and a strong emphasis on quality. We pride ourselves in making only the very best in professional audio equipment and it is all made right here in the U.S.A.
Previous Earthworks product
<< Earthworks M23
Next Earthworks product
Earthworks M30 >>
Brands Earthworks M Series M23mp Pin This on Pinterest