Earthworks C30/C-W Earthworks C30/C-W Earthworks C30/C-W

Product Information
Overview Choir microphones have always presented a unique design and installation challenge - the traditional solution is to use an angle guide on the microphone's lead to aim towards the performance venue. The problem with this approach is that either a very small microphone had to be used to keep aimable weight within practical limits - or locate the microphone's electronics at some considerable distance from the element - inviting losses and noise. The ChoirMic Series solves all of these problems. Our hanging choir microphones provide pristine audio quality without spotlighting and more gain before feedback while picking up almost no sound from the rear of the microphones. They are ideal for miking choirs and orchestra or band in front of the choir.
  • 30kHz flat frequency response
  • No spotlighting
  • Uniform frequency response on or off axis
  • More gain before feedback
  • Picks up almost no sound from the rear of the microphone
  • Electronics housed in microphone
  • Prevents RFI
  • Mini-gooseneck allows quick and easy positioning
  • Comes with 30 foot balanced, twisted pair Canare cable
  • Available in black and white
  • Custom cable lengths available
  • Does not come with XLR (order accessory C30-XLR for installed male XLR)
  • Transducer: Condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 30Hz to 30khz +/- 2dB @ 6-inches
  • Signal-to-Noise Ratio: 22dB SPL Equivalent (A-Weighted)
  • Maximum Input Sound Level: 145dB
  • Power Requirements: +48V Phantom
  • Output Impedance: 100 ohms Balanced
  • Output Connectors: Attached 30-foot (10m) cable with tinned leads (blue +)
  • Pad: No
  • Low Frequency Roll-Off: No
  • Dimensions: 9.84 x 0.86" (250 x 22mm) (Length x Diameter)
  • Weight: 0.22 lb (100 g)
comments powered by Disqus
Brand Earthworks
Model C30/C-W
Part Number C30/C-W
UPC 827517000145
Product Category Hanging Microphones
Unit of Measure EACH
Shipping Weight 6.96 lbs.
Earthworks Performance Audio is an authorized Earthworks dealer.
Earthworks is a New Hampshire, U.S.A. based company that is dedicated to quality and sonic excellence. Each Earthworks product is made with great care, meticulous attention to detail and a strong emphasis on quality. We pride ourselves in making only the very best in professional audio equipment and it is all made right here in the U.S.A.
Previous Earthworks product
<< Earthworks C30/C-B
Next Earthworks product
Earthworks C30/HC-B >>
Brands Earthworks ChoirMic Series C30/C-W Pin This on Pinterest