DPA Microphones MSB6000 DPA Microphones MSB6000 DPA Microphones MSB6000

Product Information
Overview The Master Sum Box incorporates two high-performance, Lundahl transformer-coupled mic preamplifiers for the microphone outputs. The whole system is powered by two channels of 48V phantom power from your mixing console. A red light for each channel will flash when phantom power is supplied.

Input: Single 4-pin female XLR, to connect from the SSB6000

Outputs: Dual 3-pin male XLR, 2 channel microphone outputs

Crosstalk: -70dB at 1kHz

Dimensions: 12 x 10.4 x 3.4cm ( 4.7 x 4.10 x 1.4in)
  • Frequency Range, +/- 3 dB: 100Hz -10kHz with Soft Boost Grid, 100Hz -15kHz with High Boost Grid. Hi-cut: -6dB/oct. from 10 kHz, lo-cut: -6dB/oct. from 100Hz.
  • Total Harmonic Distortion (THD): 0.05% (100Hz - 10kHz)
  • Output impedance: <600 Ohm
  • Power supply: 48V phantom, applied simultaneously to the 2 microphone output
  • Weight: 399 g (14,1 oz)
  • Cable Drive Capability: 200 meters
comments powered by Disqus
Brand DPA Microphones
Model MSB6000
Part Number MSB6000
Product Category Microphone Accessories
Unit of Measure EACH
Shipping Weight 2.00 lbs.
DPA Microphones Performance Audio is an authorized DPA Microphones dealer.
Close your eyes and listen. From the subtlest nuances of a solo violin or vocalist to the thunderous intensity of a full brass section or drum kit, it's all there, spectacularly pure and uncolored. The sound is so crisp and detailed that you begin to create a mental picture of what the recording environment looked like. The microphones responsible? DPA, of course.
Brands DPA Microphones MSB6000 Pin This on Pinterest