DPA Microphones MMB4067-F DPA Microphones MMB4067-F

Product Information
Overview Miniature Microphone Boom for use with AHM6000 Adjustable Headband Mount. Combined, the boom and mount comprise a 4067 headband.

MMB4067 is available in three colors: black, beige and chocolate.
  • Directional characteristics: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser element with vertical diaphragm
  • Frequency range, +/- 2 dB: Soft boost grid: 50 Hz - 20 kHz +/-2 dB, 3 dB soft boost at 8 - 20 kHz, lo-cut -10 dB at 20 Hz. High boost grid: 50 Hz - 20 kHz +/-2 dB, 10 dB boost at 12 kHz, lo-cut -10 dB at 20 Hz.
  • Sensitivity, nominal, +/-2 dB: Nominally 1 mV/Pa; -60 dB re. 1 V/Pa +/- 3 dB at 1 kHz
  • Equivalent noise level A-weighted: Typ. 31 dB(A) re. 20 Pa (max. 35 dB(A))
  • Equiv. noise level ITU-R BS.468-4: Typ. 42 dB (max. 44 dB)
  • Total harmonic distortion (THD): 123 dB SPL peak (<1% THD); 120 dB SPL RMS sine (<1% THD)
  • Max. SPL, peak before clipping: 154 dB SPL peak before clipping
  • Output impedance: 30 - 40 ohm
  • Cable drive capability: Up to 300 m (984 ft)
  • Power supply: Min. 3 V - max. 50 V (via DPA adapter)
  • Weight: 14 g (0.5 oz) incl. cable and MicroDot connector
  • Capsule diameter: 5,4 mm (0.21 in)
  • Length: 12,7 mm (0.5 in)
comments powered by Disqus
Brand DPA Microphones
Model MMB4067-F
Part Number MMB4067-F
Product Category Microphone Accessories
Unit of Measure EACH
Shipping Weight 0.50 lbs.
DPA Microphones Performance Audio is an authorized DPA Microphones dealer.
Close your eyes and listen. From the subtlest nuances of a solo violin or vocalist to the thunderous intensity of a full brass section or drum kit, it's all there, spectacularly pure and uncolored. The sound is so crisp and detailed that you begin to create a mental picture of what the recording environment looked like. The microphones responsible? DPA, of course.
Brands DPA Microphones MMB4067-F Pin This on Pinterest