Miniature Microphone Boom, Omnidirectional, Lo-Sens & DC, Brown
Miniature Microphone Boom for use with AHM6000 Adjustable Headband Mount. Combined, the boom and mount comprise a 4067 headband.
MMB4067 is available in three colors: black, beige and chocolate.
Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenserelement with vertical diaphragm
Frequency range, +/- 2 dB: Soft boost grid: 50 Hz - 20 kHz +/-2 dB, 3 dB soft boost at 8 - 20 kHz, lo-cut -10 dB at 20 Hz. High boost grid: 50 Hz - 20 kHz +/-2 dB, 10 dB boost at 12 kHz, lo-cut -10 dB at 20 Hz.
Sensitivity, nominal, +/-2 dB: Nominally 1 mV/Pa; -60 dB re. 1 V/Pa +/- 3 dB at 1 kHz
Equiv. noiselevel ITU-R BS.468-4: Typ. 42 dB (max. 44 dB)
Total harmonic distortion (THD): 123 dBSPLpeak (<1% THD); 120 dBSPLRMS sine (<1% THD)
Max. SPL, peak before clipping: 154 dBSPLpeak before clipping
Output impedance: 30 - 40 ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: Min. 3 V - max. 50 V (via DPA adapter)
Weight: 14 g (0.5 oz) incl. cable and MicroDot connector
Capsule diameter: 5,4 mm (0.21 in)
Length: 12,7 mm (0.5 in)
Unit of Measure
Performance Audio is an authorized DPA Microphones dealer. Close your eyes and listen. From the subtlest nuances of a solo violin or vocalist to the thunderous intensity of a full brass section or drum kit, it's all there, spectacularly pure and uncolored. The sound is so crisp and detailed that you begin to create a mental picture of what the recording environment looked like. The microphones responsible? DPA, of course.