DPA Microphones 5006-11 DPA Microphones 5006-11


Product Information
Overview Intended for use in Decca Tree front/backwards faced cardioids rear configuration, this kit offers:
The Decca Tree advantages: more vivid dynamics and clarity due to its closer placement
The excellent sound color and authentic reproduction that is unique for omni microphones
Full frequency range in front channels
Relatively little direct signal in rear channels; avoiding the front sound sources from sounding too close or even behind you
Specifications
  • Directional characteristics: 4006-TL: Omnidirectional, 4011-TL: Cardioid
  • Principle of operation: 4006-TL: Pressure, 4011-TL: Pressure gradient
  • Cartridge type: 4006-TL:16 mm (0.63 in) pre-polarized condenser, 4011-TL: 19 mm (0.75 in) pre-polarized condenser
  • Frequency range: 4006-TL: 15 Hz - 20 kHz, 4011-TL: 40 Hz - 20 kHz
  • Sensitivity, nominal, +/-2 dB: 4006-TL: 35 mV/Pa; -29 dB re. 1 V/Pa, 4011-TL: 10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent noise level A-weighted: 4006-TL: Typ. 15 dB(A) re. 20 Pa (max. 17 dB(A)), 4011-TL: Typ. 19 dB(A) re. 20 Pa (max. 20 dB(A))
  • Equiv. noise level ITU-R BS.468-4: 4006-TL: Typ. 27 dB (max. 29 dB), 4011-TL: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
  • S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 4006-TL: 79 dB, 4011-TL: 75 dB(A)
  • Total harmonic distortion (THD): 4006-TL: <0.5% THD up to 129 dB SPL peak, <1% THD up to 135 dB SPL peak. 4011-TL: <0.5% up to 110 dB SPL peak, <1% up to 116 dB SPL peak
  • Dynamic range: 4006-TL: Typ. 120 dB, 4011-TL: Typ. 97 dB
  • Max. SPL, peak before clipping: 4006-TL: 143 dB, 4011-TL: 158 dB
  • Attenuators, filters etc.: 4011-TL: 0 dB, -20 dB
  • Output impedance: 4006-TL: <200 Ohm, 4011-TL: <200 Ohm
  • Cable drive capability: 4006-TL: Up to 100 m (328 ft), 4011-TL: Up to 100 m (328 ft)
  • Power supply: 4006-TL: Phantom P48, 4011-TL: 48 V Phantom power
  • Connector: 4006-TL: 3-pin XLR-M (Standard P48), 4011-TL: 3-pin XLR-M (Standard P48)
  • Weight: 4006-TL: 150 g (5.29 oz), 4011-TL: 165 g (5.82 oz)
  • Capsule diameter: 4006-TL: 16 mm (0.63 in), 4011-TL: 19 mm (0.75)
  • Length: 4006-TL: 165 mm (6.5 in), 4011-TL: 175 mm (6.89 in)
  • Temperature range: 4006-TL: -10 to +70 C (+14 to 158 F), 4011-TL: -10 to +70 C (+14 to 158 F)
Includes
  • 3 x 4006-TL Omnidirectional Microphones, P48, Transformerless (match within +/-0.5 dB in sensitivity and frequency response in the microphone's entire frequency range)
  • 3 x L50B Acoustic Pressure Equalizers, 50 mm (1.97 in) Ball
  • 3 x UA0961 Microphone Holder
  • 3 x DD0251 Free-field Grid, Silver
  • 2 x 4011-TL Cardioid Microphones, P48 (match within +/-1 dB in sensitivity and frequency response in the microphone's entire frequency range)
  • 2 x UA0898 Shock Mounts
  • 2 x DD0297 Diffuse-field Grid, Black
  • 2 x UA0896 Windscreen
  • 1 x PSM5000 Protractor for Shock Mount
Brand DPA Microphones
Model 5006-11
Part Number 5006-11
Product Category Instrument Microphones
Unit of Measure EACH
Weight 7.00 lbs.
DPA Microphones Performance Audio is an authorized DPA Microphones dealer.
Close your eyes and listen. From the subtlest nuances of a solo violin or vocalist to the thunderous intensity of a full brass section or drum kit, it's all there, spectacularly pure and uncolored. The sound is so crisp and detailed that you begin to create a mental picture of what the recording environment looked like. The microphones responsible? DPA, of course.
Brands DPA Microphones 5006-11 Pin This on Pinterest