Generic "off-the-shelf"
RCA audio plugs are quite common and have been in use for a very long time...well over 50 years! These old-style
RCA type solder plugs have an
impedance characteristic of roughly 25
ohm and exhibit extremely poor
Return Loss performance when mated with precision 75
ohm coaxial
video cable. In fact, they are virtually unusable for 6MHz Broadcast
Video frequencies, high
bandwidth RGB
Video Monitor lines, or even
Digital Audio data
bit streams.
Canare's all new 75
ohm type RCAP
Video Crimp Plugs are
impedance matched and achieve outstanding
analog and
digital electrical performance with a usable
bandwidth to 200MHz.
Our original 3-piece connector design offers consistent and extremely reliable terminations with a wide variety of 75
ohm coaxial cable sizes. This unique construction reduces set-up and assembly time by >80% because no soldering is ever required!
Features:
- Standard 75 ohm construction; Crimp Pin & Sleeve
- DC to 200MHz; >26dB Return Loss (<1.1 VSWR)
- Absolutely No Soldering Required
- Assembly Time Reduced by 80%
- Superior cable pull strength
- Internal Pressure Contact Fingers
- Gold plated center Shaft
- Easy Assembly using Canare Strip & Crimp Tools
- Operating temperature -20 to +60 degrees Celsius
Specifications:
- 75 ohm RCA Connector, Straight Plug
- Cable: LV-77S
- Boot: ~
- Crimp Die: TCD-5CF
- Crimp Pin: B11016E
- Sleeve: B75004A
- Parts: Body Crimp Pin, Sleeve
- Imp.: 75 ohm
- Bandwidth VSWR (Return Loss) DC to 200MHz: <1.1 (>26dB)
- Body Material (Plating): Brass (Nickel)
- Center Contact Material (Plating): Phosphor Bronze (Gold)
- Outer Contact Material: Beryllium copper
- Dielectric Material: PPO Noryl
- Crimp Pin Material (Plating): Brass (Gold)
- Crimp Sleeve Material (Plating): Copper (Tin)
- Cable Retention lbs. (kgs): >55 (>24.9)
- Insulation Resistance at 500V DC: >100M ohm
- Voltage Rating for 1 mim.: 500V AC (rms)
- Center Contact Resistance: <10m ohm